How does the intake grille fit to the front bumper?

Len_Beach · 09-06-2010, 12:38 AM

Guys,

I've bought an intake grille for the vent on my CSL bumper but am unsure how they are attached. Is it simply silicon etc or is there something more OEM?

Cheers,

Ben

sailorbaz · 09-06-2010, 12:55 AM

This the wee round one or the bigger one in the middle?

My wee round one is a bit loose and could with securing solutions!

Dan · 09-06-2010, 09:40 AM

I wouldn't mind knowing this as well as mine is stone chipped to fook and needs to come out for some paint!

karbonkid · 09-06-2010, 10:22 AM

Unsure what part you mean, you referring to the front 2x grill surrounds?

sailorbaz · 09-06-2010, 12:33 PM

Part number 8? Part number 4?

Number 4 is loads of little 'awkward' clips that are a NIGHTMARE to get off. Bumper has to come off for that one.
Number 8: I couldn't find anything securing it while I had my bumper off for paint, but would be keen to know if in fact there is something.

phat///M3 · 09-06-2010, 02:33 PM

Im not sure but I think its held on by the airtube that goes behind the bumper.

phat///M3 · 09-06-2010, 02:38 PM

Am not sure though as I dont have that tube/air feed and my grill is stuck on.

azrael · 09-06-2010, 03:14 PM

Quote:

Originally Posted by phat///M3

Im not sure but I think its held on by the airtube that goes behind the bumper.

I'm pretty sure thats the case too, it sits in a lip near the entrance to the tube

Len_Beach · 09-06-2010, 11:49 PM

Number 8 Guys, the small round one.

I've got a 100mm airfeed to run up to the airbox so this may suffice but i'm thinking silicone to secure but also make sure it's not permanent for respray purposes etc.

sailorbaz · 10-06-2010, 01:27 AM

I'd imagine just a wee bit of superglue would do the job too, just a couple of spots. Silicone would work too but what colour do you go for? White, clear or black? Oh, the choices!!! lol

09-06-2010, 12:38 AM	#1
Len_Beach Wonky 'L' after Washing Join Date: Nov 2009 Posts: 10 Casino cash: $550	How does the intake grille fit to the front bumper? Guys, I've bought an intake grille for the vent on my CSL bumper but am unsure how they are attached. Is it simply silicon etc or is there something more OEM? Cheers, Ben

09-06-2010, 09:40 AM	#3
Dan Driving it like I nicked it Join Date: Nov 2009 Posts: 2,058 Casino cash: $6689	I wouldn't mind knowing this as well as mine is stone chipped to fook and needs to come out for some paint! __________________

09-06-2010, 10:22 AM	#4
karbonkid S6, Sport On, Traction Off Join Date: Nov 2008 Location: Sussex Posts: 1,912 Casino cash: $10231	Unsure what part you mean, you referring to the front 2x grill surrounds? __________________

09-06-2010, 02:33 PM	#6
phat///M3 S5, Sport Off, DSC M-track Join Date: Feb 2009 Location: Marbella Posts: 946 Casino cash: $4049	Im not sure but I think its held on by the airtube that goes behind the bumper. __________________ ///M3 CB/BLK Alcantara ~ OEM BABY ~ H&R ¦ Brembo ¦ Eisenmann ¦ CSL Bootlid ¦ CSL Interior ¦ CSL Diffuser ¦ CSL Bumper ¦ CSL Wheels ¦ AC Schnitzer ¦ Rogue Engineering ¦ Recaro

09-06-2010, 02:38 PM	#7
phat///M3 S5, Sport Off, DSC M-track Join Date: Feb 2009 Location: Marbella Posts: 946 Casino cash: $4049	Am not sure though as I dont have that tube/air feed and my grill is stuck on. __________________ ///M3 CB/BLK Alcantara ~ OEM BABY ~ H&R ¦ Brembo ¦ Eisenmann ¦ CSL Bootlid ¦ CSL Interior ¦ CSL Diffuser ¦ CSL Bumper ¦ CSL Wheels ¦ AC Schnitzer ¦ Rogue Engineering ¦ Recaro

09-06-2010, 11:49 PM	#9
Len_Beach Wonky 'L' after Washing Join Date: Nov 2009 Posts: 10 Casino cash: $550	Number 8 Guys, the small round one. I've got a 100mm airfeed to run up to the airbox so this may suffice but i'm thinking silicone to secure but also make sure it's not permanent for respray purposes etc.