What PS2 size upfront?

karbonkid · 27-06-2010, 02:33 PM

With me changing a set of CSL rims from Cups to PS2s as I need a set of wets, I did consider a different size up front from the OEM 235/35/19.

I am more strong-minded on running 235 again, but with getting great results from running 265 on a 9J rim for track work I couldn't help but think a wider front maybe worth trying, considered a 245 or even a 255 PS2. TBH I will probably run a 235, but did cross my mind. Anyone run this size with a 265/30/19 at rear? Would appreciate any feedback on thoughts.

Off to the pub... so expect some good comments below time im back.

TIA,

Bealo · 27-06-2010, 03:04 PM

I run 245/35/19 on the fronts and 275/30/19 on the rears. Ok not PS2's but Falkens without any issues what so ever.

But when i try the PS2's next i will try to get them in the above sizes

sailorbaz · 27-06-2010, 09:25 PM

Quote:

Originally Posted by Bealo

I run 245/35/19 on the fronts and 275/30/19 on the rears. Ok not PS2's but Falkens without any issues what so ever.

x2 And thats with 12mm spacers on the front and 5mm on the rear. I do rate the Falkens and about to replace the rears with the same.

**glendog74** · 27-06-2010, 11:42 PM

Why not consider running rears on the front axle like others have done in the past? 265/30/19

**shimmy** · 27-06-2010, 11:46 PM

Quote:

Originally Posted by glendog74

Why not consider running rears on the front axle like others have done in the past? 265/30/19

I think with the csl rear offset you can only run on -3 camber unless you roll the arches, and if you do that you get tramlining and huge wear

**glendog74** · 27-06-2010, 11:49 PM

The arches are already rolled on a CSL as standard. Is -3deg camber what others like 'houlbt' have ran before?

karbonkid · 28-06-2010, 07:23 AM

@bealo what sizes were you refering to trying above. From your 245 back to 235 or a 255?

@glendoggy I'm only running OEM 9J & 9.5J, don't particually wanna go down that road of buying another set of rears to run 265 upfront, although a 265 could be run on a 9J anyhoo. What I'm more interested in is what maximum size could/ or has people run on a OEM 9J front? Is a 255 gonna be too much? Remember a while back some said a 245 just didn't seem right on fronts compared to 235?

Bealo · 28-06-2010, 10:14 AM

I have ran a 245 on a standard front CSL rim with no problems what so ever and would want to run a 245 PS2 (if they do that size) when i come to renew my road rubber

27-06-2010, 02:33 PM	#1
karbonkid S6, Sport On, Traction Off Join Date: Nov 2008 Location: Sussex Posts: 1,912 Casino cash: $10231	What PS2 size upfront? With me changing a set of CSL rims from Cups to PS2s as I need a set of wets, I did consider a different size up front from the OEM 235/35/19. I am more strong-minded on running 235 again, but with getting great results from running 265 on a 9J rim for track work I couldn't help but think a wider front maybe worth trying, considered a 245 or even a 255 PS2. TBH I will probably run a 235, but did cross my mind. Anyone run this size with a 265/30/19 at rear? Would appreciate any feedback on thoughts. Off to the pub... so expect some good comments below time im back. TIA, __________________ Last edited by karbonkid; 27-06-2010 at 02:36 PM.

27-06-2010, 03:04 PM	#2
Bealo Driving it like I nicked it Join Date: Aug 2008 Location: Everywhere. Posts: 2,540 Casino cash: $12738	I run 245/35/19 on the fronts and 275/30/19 on the rears. Ok not PS2's but Falkens without any issues what so ever. But when i try the PS2's next i will try to get them in the above sizes __________________

27-06-2010, 11:42 PM	#4
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	Why not consider running rears on the front axle like others have done in the past? 265/30/19 __________________ Cha'mone Mother F**ker!

27-06-2010, 11:49 PM	#6
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	The arches are already rolled on a CSL as standard. Is -3deg camber what others like 'houlbt' have ran before? __________________ Cha'mone Mother F**ker!

28-06-2010, 07:23 AM	#7
karbonkid S6, Sport On, Traction Off Join Date: Nov 2008 Location: Sussex Posts: 1,912 Casino cash: $10231	@bealo what sizes were you refering to trying above. From your 245 back to 235 or a 255? @glendoggy I'm only running OEM 9J & 9.5J, don't particually wanna go down that road of buying another set of rears to run 265 upfront, although a 265 could be run on a 9J anyhoo. What I'm more interested in is what maximum size could/ or has people run on a OEM 9J front? Is a 255 gonna be too much? Remember a while back some said a 245 just didn't seem right on fronts compared to 235? __________________ Last edited by karbonkid; 28-06-2010 at 07:26 AM.

28-06-2010, 10:14 AM	#8
Bealo Driving it like I nicked it Join Date: Aug 2008 Location: Everywhere. Posts: 2,540 Casino cash: $12738	I have ran a 245 on a standard front CSL rim with no problems what so ever and would want to run a 245 PS2 (if they do that size) when i come to renew my road rubber __________________