Changing SMG Paddles

pinkpanther008 · 26-05-2010, 04:58 PM

Quick question: Changing SMG paddles tonight, do i need to take steering wheel off or will i be able to slide others on from behind wheel?

Cheers in advance PP

karbonkid · 26-05-2010, 05:23 PM

Well theres Duncans way and everyone elses way.

No need to remove the steering wheel, simply remove the 2 torx screws and replace with new paddles. Instructions Here

mattCSLnut · 26-05-2010, 05:27 PM

Quote:

Originally Posted by karbonkid

Well theres Duncans way and everyone elses way.

Did that involve a Fork Lift truck ?

DuncanR · 26-05-2010, 05:27 PM

Quote:

Originally Posted by karbonkid

Well theres Duncans way and everyone elses way.

Dont change them ! ... my engine fookin blew after i changed mine ! KK i want me money back !

DuncanR · 26-05-2010, 05:29 PM

Quote:

Originally Posted by mattCSLnut

Did that involve a Fork Lift truck ?

Cock !

karbonkid · 26-05-2010, 05:33 PM

Quote:

Originally Posted by DuncanR

Dont change them ! ... my engine fookin blew after i changed mine ! KK i want me money back !

Be grateful then, I got ya a fresh noo lump FOC!

mattCSLnut · 26-05-2010, 05:34 PM

Quote:

Originally Posted by DuncanR

Cock !

danp · 26-05-2010, 06:59 PM

Quote:

Originally Posted by pinkpanther008

Quick question: Changing SMG paddles tonight, do i need to take steering wheel off or will i be able to slide others on from behind wheel?

Cheers in advance PP

I bought some AC Schnitzer carbon paddles yonks ago and never got round to fitting them... just taken the old ones off and ref those instructions would comment:

- It was a Torx T15 for me.
- There is only a few mm of thread holding them in, I used some pliers to pull them out once unscrewed.

**Mark CSL** · 26-05-2010, 08:08 PM

Quote:

Originally Posted by pinkpanther008

Quick question: Changing SMG paddles tonight, do i need to take steering wheel off or will i be able to slide others on from behind wheel?

Cheers in advance PP

Installation Guide for SMG Paddles
Tools required: Torx T-20
Time required: +/- 5 minutes
1.) Original OEM Paddles

2.) Look behind the steering wheel, you will find the screw that holds the paddles to the
steering wheel. Use Torx T-20 to take the screw out

3.) You will see a spring sticking out from the steering wheel.

4.) Put Paddles on proper position and put the screw back in using Torx T-20

5.) Repeat for the left side. You are done!

pinkpanther008 · 26-05-2010, 11:07 PM

Job done, cheers for the advice all.

Will test properly at the weekend but initial impressions good

26-05-2010, 04:58 PM	#1
pinkpanther008 S5 - Full Throttle Join Date: Dec 2008 Location: Essex England Posts: 359 Casino cash: $5033	Changing SMG Paddles Quick question: Changing SMG paddles tonight, do i need to take steering wheel off or will i be able to slide others on from behind wheel? Cheers in advance PP __________________ purple haze...

26-05-2010, 05:23 PM	#2
karbonkid S6, Sport On, Traction Off Join Date: Nov 2008 Location: Sussex Posts: 1,912 Casino cash: $10231	Well theres Duncans way and everyone elses way. No need to remove the steering wheel, simply remove the 2 torx screws and replace with new paddles. Instructions Here __________________

26-05-2010, 11:07 PM	#10
pinkpanther008 S5 - Full Throttle Join Date: Dec 2008 Location: Essex England Posts: 359 Casino cash: $5033	Job done, cheers for the advice all. Will test properly at the weekend but initial impressions good __________________ purple haze...