Can anyone ID these pads? (AP Racing 6pot)

[alexk]

There are definitely not CP5555 calipers.
The CP5555 is identical to the CP5575 just a bit thicker to accomodate the 18mm thick pads.

[Dali]

Originally Posted by JBird

If they are DS2500, just be sure your read the warning posts about them - fine pad for road but not for track.

Originally Posted by GregorJP

Absolutely agree with this. I cooked mine on track in no time. I currently run PF01s, which are dusty but great.

Noted, thanks - are PF01's good for fast road or overkill? I welcome any recommendations for a fast road pad that isn't noisy.

Originally Posted by alexk

There are definitely not CP5555 calipers.
The CP5555 is identical to the CP5575 just a bit thicker to accomodate the 18mm thick pads.

Ok cool - thanks, I'll just have to take the wheel off and look at the part number stamped onto the callipers.

[trackm3]

Originally Posted by Dali

Noted, thanks - are PF01's good for fast road or overkill? I welcome any recommendations for a fast road pad that isn't noisy.



Ok cool - thanks, I'll just have to take the wheel off and look at the part number stamped onto the callipers.

Send me a picture of the pad shape and I can tell you what caliper it is ?

Ive got a few guys running RS4.2 Blues, great fast road pad,

M

[tommy]

Dali, the 01 would make your ears bleed for fast road driving.

[Dali]

Originally Posted by trackm3

Send me a picture of the pad shape and I can tell you what caliper it is ?

Ive got a few guys running RS4.2 Blues, great fast road pad,

M

Hi Martin - the pads I am using are the ones in my original post in this thread (on page 1... or do you need a reverse shot?).

Originally Posted by tommy

Dali, the 01 would make your ears bleed for fast road driving.

Haha, ok I'm going to stick with DS2500 for now and take on-board the comments about not using them for track. Cheers

[trackm3]

Originally Posted by Dali

Hi Martin - the pads I am using are the ones in my original post in this thread (on page 1... or do you need a reverse shot?).



Haha, ok I'm going to stick with DS2500 for now and take on-board the comments about not using them for track. Cheers

Dal

have you any measurements, height and width

[Dali]

Originally Posted by trackm3

Dal

have you any measurements, height and width

Unfortunately no, once I get the part numbers on the callipers I'll send you a pm.

Thanks for the tips guys.