A few newbie questions

Kiwi CSL · 25-02-2015, 10:37 PM

Hi everyone, as a new CSL owner I have a couple of questions I thought I would lump together in one post:

1. I see some cars have a plaque on the centre console, was this optional? Can you order one now at all?

2. Does anyone know the specs for the little screws that hold the seat lifting plastic handle on, as seems to be the norm mine are stripped and I would like to replace them. Links possibly?

3. What tyres are people using. The previous owner was not using the CSL wheels and they still have the original 2003 Cup tyres. I want to put them back on and am considering going to Pilot Super Sports which seem to be good. Is that what most people are using?

s.mac · 25-02-2015, 11:07 PM

1. Depends if your chassis number has been allocated one. Check with BMW. FOC but expensive to buy, if you can find one, or buy a copy.
2. Sorry no idea
3. Get some tyre softener and put the cups on. I will get shot down for that but they will be fine with the right liquid applied

Clubber · 25-02-2015, 11:12 PM

Quote:

Originally Posted by Kiwi CSL

Hi everyone, as a new CSL owner I have a couple of questions I thought I would lump together in one post:

1. I see some cars have a plaque on the centre console, was this optional? Can you order one now at all?

2. Does anyone know the specs for the little screws that hold the seat lifting plastic handle on, as seems to be the norm mine are stripped and I would like to replace them. Links possibly?

3. What tyres are people using. The previous owner was not using the CSL wheels and they still have the original 2003 Cup tyres. I want to put them back on and am considering going to Pilot Super Sports which seem to be good. Is that what most people are using?

Welcome and congrats on a great buy.

I wouldn't know about the first two but when it comes to tyres. I run the cups with my 18" track set and run MSS for my CSL's for the road. Both for safety and longevity of the track set I don't run the cups on the street.

BTW, I am no expert but 12 years old CUP's are NOT a good idea, I hope you meant the wheels

s.mac · 25-02-2015, 11:21 PM

http://www.demon-tweeks.co.uk/motors...-tyre-softener

As good as new, if not better

Kiwi CSL · 26-02-2015, 03:09 AM

Yes the tyres are original on the CSL rims (it is currently on E92 18"s) and a bit low on tread anyway so that is why I want to put new tyres on the CSL rims and get them back on there. Selling off the E92 mags might offset some cost, or I may keep them as track wheels since they will be a bit cheaper being 18s.

Neil M · 26-02-2015, 11:49 AM

Plaque: All UK CSL's should have been fitted with a plaque, however some weren't. The plaques were left in the glove box for the new owner to fit.
These plaques were provided by BMW UK and are not official BMW parts, eg. no part number available, therefore they don't exist.

Screws: don't kow!

Tyres: 'Cup' for fine weather/track use

MPSS for everyday use.

**Mark CSL** · 26-02-2015, 12:08 PM

I think i have some screws will have a look if i have them i can post you 2

Welcome to the site enjoy the new car

**Mark CSL** · 26-02-2015, 12:14 PM

Yes i have a pack with 8 screws in

Send me your address and i shall pop 2 in the post

Rick H · 26-02-2015, 12:26 PM

[quote=Neil M;179641]Plaque: All UK CSL's should have been fitted with a plaque, however some weren't. The plaques were left in the glove box for the new owner to fit.
These plaques were provided by BMW UK and are not official BMW parts, eg. no part number available, therefore they don't exist.

My plaque was in the handbook pouch when I got the car from Rob, it wasn't attached. It is now. I would check there just in case before ordering a new one.

Neil M · 26-02-2015, 12:40 PM

Quote:

Originally Posted by Rick H

My plaque was in the handbook pouch when I got the car from Rob, it wasn't attached. It is now. I would check there just in case before ordering a new one.

Sorry Rick, you can't order one as they don't exist!
A couple of years ago you could get one from BMW UK on production of your Vin and Details, but I think you'll find 'NLA' would be their answer now.

They do appear albeit very infrequently on ebay, but go for silly money.

25-02-2015, 10:37 PM	#1
Kiwi CSL Wonky 'L' after Washing Join Date: Feb 2015 Posts: 7 Casino cash: $245	A few newbie questions Hi everyone, as a new CSL owner I have a couple of questions I thought I would lump together in one post: 1. I see some cars have a plaque on the centre console, was this optional? Can you order one now at all? 2. Does anyone know the specs for the little screws that hold the seat lifting plastic handle on, as seems to be the norm mine are stripped and I would like to replace them. Links possibly? 3. What tyres are people using. The previous owner was not using the CSL wheels and they still have the original 2003 Cup tyres. I want to put them back on and am considering going to Pilot Super Sports which seem to be good. Is that what most people are using?

26-02-2015, 11:49 AM	#6
Neil M Driving it like I nicked it Join Date: Jan 2012 Location: Manchester Posts: 2,340 Casino cash: $19143	Plaque: All UK CSL's should have been fitted with a plaque, however some weren't. The plaques were left in the glove box for the new owner to fit. These plaques were provided by BMW UK and are not official BMW parts, eg. no part number available, therefore they don't exist. Screws: don't kow! Tyres: 'Cup' for fine weather/track use MPSS for everyday use. __________________ “With the CSL, BMW have achieved The Ultimate Driving Machine” SG CSL '051'

26-02-2015, 12:08 PM	#7
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	I think i have some screws will have a look if i have them i can post you 2 Welcome to the site enjoy the new car __________________ www.procarkits.co.uk

26-02-2015, 12:14 PM	#8
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	Yes i have a pack with 8 screws in Send me your address and i shall pop 2 in the post __________________ www.procarkits.co.uk

25-02-2015, 11:07 PM	#2
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	1. Depends if your chassis number has been allocated one. Check with BMW. FOC but expensive to buy, if you can find one, or buy a copy. 2. Sorry no idea 3. Get some tyre softener and put the cups on. I will get shot down for that but they will be fine with the right liquid applied

25-02-2015, 11:21 PM	#4
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	http://www.demon-tweeks.co.uk/motors...-tyre-softener As good as new, if not better

26-02-2015, 03:09 AM	#5
Kiwi CSL Wonky 'L' after Washing Join Date: Feb 2015 Posts: 7 Casino cash: $245	Yes the tyres are original on the CSL rims (it is currently on E92 18"s) and a bit low on tread anyway so that is why I want to put new tyres on the CSL rims and get them back on there. Selling off the E92 mags might offset some cost, or I may keep them as track wheels since they will be a bit cheaper being 18s.

26-02-2015, 12:26 PM	#9
Rick H S5, Sport Off, DSC M-track Join Date: Oct 2012 Location: The North West Posts: 801 Casino cash: $12295	[quote=Neil M;179641]Plaque: All UK CSL's should have been fitted with a plaque, however some weren't. The plaques were left in the glove box for the new owner to fit. These plaques were provided by BMW UK and are not official BMW parts, eg. no part number available, therefore they don't exist. My plaque was in the handbook pouch when I got the car from Rob, it wasn't attached. It is now. I would check there just in case before ordering a new one.