![]() |
![]() |
#1 |
CSL Register Uber-poster!
![]() Join Date: Oct 2010
Location: Marlow
Posts: 3,973
Casino cash: $18153 ![]() |
![]()
I am trying to find the best places to fit a full harness seat belt to my CSL, on the back seat behind the driver there is a couple of brackets either side of the seat doing nothing ? can these be removed and put harness eyes in their place. Cheer
![]() |
![]() |
![]() |
![]() |
#2 | |
CSL Register Uber-poster!
![]() Join Date: Feb 2009
Location: warrington
Posts: 5,419
Casino cash: $19783 ![]() |
![]() Quote:
You could remove these and bolt in also. What seat are you installing? |
|
![]() |
![]() |
![]() |
#3 |
CSL Register Uber-poster!
![]() Join Date: Oct 2010
Location: Marlow
Posts: 3,973
Casino cash: $18153 ![]() |
![]()
Thank you for that never thought about just clipping direct to the brackets, Standard seat at the moment. where would you recomend fitting the sides to the seat belt too.
![]() |
![]() |
![]() |
![]() |
#4 |
S6, Sport On, Traction Off
Join Date: Nov 2008
Location: Sussex
Posts: 1,912
Casino cash: $10231 ![]() |
![]()
Depending on what seats, side mounts and harnesses you have or thinking of purchasing. Shoulder straps like said can be clipped to an eye bold with ease if you have the clip type fixing or wrapped around harness bar or similar. Waist straps can be fitted to original waist fix points with aid of the correct end fixing... and then sub-belts on a 5/6 point harness will need to be bolted through floor or side mount.
|
![]() |
![]() |
![]() |
#5 | |
S6, Sport On, Traction Off
Join Date: Jun 2008
Location: Aberdeenshire
Posts: 1,946
Casino cash: $25386 ![]() |
![]() Quote:
Fit a proper bucket seat for harnesses IMO. |
|
![]() |
![]() |
![]() |
#6 |
CSL Register Uber-poster!
![]() Join Date: Feb 2009
Location: warrington
Posts: 5,419
Casino cash: $19783 ![]() |
![]() |
![]() |
![]() |
![]() |
#7 |
S4 - Getting the hang of it
![]() Join Date: May 2011
Posts: 135
Casino cash: $4767 ![]() |
![]()
Are the isofix points substantial enough for a harness? I know they are welded to the monocoque, but they don't look like they could take the force of a decelerating adult (but then again, I am a bit of a fat git).
|
![]() |
![]() |
![]() |
#8 |
CSL Register Uber-poster!
![]() ![]() Join Date: Apr 2008
Location: Uk
Posts: 14,646
Casino cash: $43909 ![]() |
![]()
Put the seat belt on as well!
__________________
. |
![]() |
![]() |
![]() |
#9 |
S5 - Full Throttle
Join Date: May 2009
Location: Solihull, West Midlands
Posts: 297
Casino cash: $2712 ![]() |
![]()
DO NOT USE THE ISOFIX. They are for child and seat not for the full weight of a grown adult.
As mentioned earlier, use a proper bucket seat and secure on a bar. Also remember the harness belt needs to stay as horizontal as possible before it goes through the seat. For non-caged cars, the CG-Lock on the standard belt is the best option. ![]()
__________________
M3 CSL, Silver Grey, 2004, Factory de-limit, Alcon BBK, Rogue Rear Control Arms, Turner Top Mounts, Braille CF Battery |
![]() |
![]() |
![]() |
|
|