Steering Shake when braking

Khantouch · 19-07-2016, 11:48 PM

The steering shakes when I apply the brakes at speeds over 40mph and above. It's fine when braking under 40. If feels as if the discs are warped. I have an AP set up fitted which has only covered approx 200 miles. However I have recently fitted a set of 12mm spacers all round. Any ideas or pointers as to what it could be?
All advice appreciated.
Kamran

**Mark CSL** · 19-07-2016, 11:55 PM

Quote:

Originally Posted by Khantouch

The steering shakes when I apply the brakes at speeds over 40mph and above. It's fine when braking under 40. If feels as if the discs are warped. I have an AP set up fitted which has only covered approx 200 miles. However I have recently fitted a set of 12mm spacers all round. Any ideas or pointers as to what it could be?
All advice appreciated.
Kamran

Does it do it without the spacers ?

Khantouch · 20-07-2016, 12:03 AM

[quote=Mark CSL;196558]Does it do it without the spacers ?[/QUOT

The spacers have been on for approx 80 miles and was fine. It's just developed this recent but I'll try it without them to see if it's better

billyboysm3 · 20-07-2016, 11:56 AM

Quote:

Originally Posted by Khantouch

The steering shakes when I apply the brakes at speeds over 40mph and above. It's fine when braking under 40. If feels as if the discs are warped. I have an AP set up fitted which has only covered approx 200 miles. However I have recently fitted a set of 12mm spacers all round. Any ideas or pointers as to what it could be?
All advice appreciated.
Kamran

Did you bed the discs and pads in properly? And does the kit have the DS2500?
If you have still been braking hard those pads leave nasty deposits on the discs.

lee · 20-07-2016, 12:58 PM

I has the same with new discs on the APs it was the discs bells so had to get them skimmed and balanced

**shimmy** · 20-07-2016, 01:43 PM

Pad deposits

Trawler · 20-07-2016, 07:14 PM

Quote:

Originally Posted by billyboysm3

Did you bed the discs and pads in properly? And does the kit have the DS2500?
If you have still been braking hard those pads leave nasty deposits on the discs.

Tell me about it.

Khantouch · 21-07-2016, 11:37 PM

Thanks Gents for the info, my apologies for not replying earlier due to working unsociable hours.
I purchased the kit from Martin (Track M3) and from what I can recall the kit came with 17mm Ferroda Pads. I use the car occasionally on weekends and have braked hard on a number of occasions when opening her up late a night.
I suspect the issue is a result of the brake residue a number of you have advised, what is the best way to rid of this.
Also in terms of bedding the brakes in properly, what should have I done or do?

Thanks

Kam

s.mac · 24-07-2016, 09:58 PM

60 then slam on numerous times. If you do a google it will come up, there's more to it than 60, I think you build it up to 100. Get the discs blue.

billyboysm3 · 25-07-2016, 08:58 AM

Quote:

Originally Posted by s.mac

60 then slam on numerous times. If you do a google it will come up, there's more to it than 60, I think you build it up to 100. Get the discs blue.

That's a out right. Think it's the instructions on the rs29's.

19-07-2016, 11:48 PM	#1
Khantouch Mode S1 - Starting Out Join Date: Jun 2010 Posts: 25 Casino cash: $944	Steering Shake when braking The steering shakes when I apply the brakes at speeds over 40mph and above. It's fine when braking under 40. If feels as if the discs are warped. I have an AP set up fitted which has only covered approx 200 miles. However I have recently fitted a set of 12mm spacers all round. Any ideas or pointers as to what it could be? All advice appreciated. Kamran

20-07-2016, 01:43 PM	#6
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	Pad deposits __________________ .

20-07-2016, 12:03 AM	#3
Khantouch Mode S1 - Starting Out Join Date: Jun 2010 Posts: 25 Casino cash: $944	[quote=Mark CSL;196558]Does it do it without the spacers ?[/QUOT The spacers have been on for approx 80 miles and was fine. It's just developed this recent but I'll try it without them to see if it's better

20-07-2016, 12:58 PM	#5
lee S2 - Picking it up Join Date: Mar 2012 Posts: 77 Casino cash: $18601	I has the same with new discs on the APs it was the discs bells so had to get them skimmed and balanced

21-07-2016, 11:37 PM	#8
Khantouch Mode S1 - Starting Out Join Date: Jun 2010 Posts: 25 Casino cash: $944	Thanks Gents for the info, my apologies for not replying earlier due to working unsociable hours. I purchased the kit from Martin (Track M3) and from what I can recall the kit came with 17mm Ferroda Pads. I use the car occasionally on weekends and have braked hard on a number of occasions when opening her up late a night. I suspect the issue is a result of the brake residue a number of you have advised, what is the best way to rid of this. Also in terms of bedding the brakes in properly, what should have I done or do? Thanks Kam

24-07-2016, 09:58 PM	#9
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	60 then slam on numerous times. If you do a google it will come up, there's more to it than 60, I think you build it up to 100. Get the discs blue.