Geniune 18" E46 M3 Alloys

mattCSLnut · 13-10-2011, 09:30 AM

Quote:

Originally Posted by shimmy

Rears are ok,

cP5575 fit under 18s and cp5555 need spacers on front

I'm guessing Billy must have the CP5575 APs as the 18" 9J went on a treat

billyboysm3 · 13-10-2011, 09:54 AM

picture

**shimmy** · 13-10-2011, 10:06 AM

The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims

billyboysm3 · 13-10-2011, 12:10 PM

Quote:

Originally Posted by shimmy

The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims

I get ya.

Billy

_Nathan_ · 13-10-2011, 01:21 PM

Quote:

Originally Posted by shimmy

The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims

Probably not with a rear wheel on the front though?

northernjim · 13-10-2011, 03:44 PM

Quote:

Originally Posted by _Nathan_

Probably not with a rear wheel on the front though?

+1

**shimmy** · 13-10-2011, 04:21 PM

Quote:

Originally Posted by _Nathan_

Probably not with a rear wheel on the front though?

good point

and offset is smaller so sticks out further on top of that

13-10-2011, 10:06 AM	#3
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims __________________ .