25-11-2009, 08:48 PM | #1 |
S2 - Picking it up
Join Date: Aug 2009
Posts: 45
Casino cash: $1401 |
Steering Wheels
Bit of a geeky question but here goes...
I just bought a CSL steering wheel off fleebay (I plan to get my original recovered and use this on the car while it's being done), however the SMG paddles are flat on the back rather than dimpled like the ones on my CSL. Does this mean it's off a CS or just a later / earlier version from a CSL? If it is from a CS any ideas if it is fully compatible with a CSL...? Ta, tex. |
25-11-2009, 11:05 PM | #2 |
S5, Sport On, DSC M-track
Join Date: Jun 2008
Location: Auckland, New Zealand
Posts: 1,434
Casino cash: $13579 |
Just different sized paddles for euro market and US market - it seems the Europeans have smaller hands than the Americans, so they all got the larger paddles whereas the Americans got the smaller paddles.
http://web.archive.org/web/200712251...dles/index.htm http://www.turnermotorsport.com/html...ID=32347891004 Just swap them over - they all bolt up the same. Last edited by NZ_M3; 25-11-2009 at 11:12 PM. |
26-11-2009, 08:55 PM | #3 |
S2 - Picking it up
Join Date: Aug 2009
Posts: 45
Casino cash: $1401 |
Excellent, thanks for that, much appreciated. Forums are amazing aren't they when you get an answer to a random question from the other side of the world!
|
26-11-2009, 09:26 PM | #4 |
CSL Register Uber-poster!
Join Date: Apr 2008
Location: Uk
Posts: 14,646
Casino cash: $43909 |
therefore i guess answering your forst question the smaller ones must be of the CS as the CSL was never sold in the USofA
|
|
|