Seat height

petery · 01-12-2010, 04:54 PM

The seat in my car has been raised by the previous owner by putting a spacer under the runner that bolts to the floor to raise the rear of the seat. Do these bolts have a nut on the bottom of them or are they in to a bush in the shell?

I'm assuming that its not standard as the passenger seat runners sit on the floor.

**cantfind1** · 01-12-2010, 05:08 PM

The nuts are welded to the chassis so you can undo the bolts no probs.

petery · 01-12-2010, 05:23 PM

Thanks, removed the spacers big improvement, I can see out the windscreen with the sunvisor down now!

**cantfind1** · 01-12-2010, 05:26 PM

I hate when midgets drive CSL's, it scares me a little!

Bounce · 01-12-2010, 08:35 PM

Quote:

Originally Posted by cantfind1

I hate when midgets drive CSL's, it scares me a little!

Be careful what you say,as there's a couple on here.

s.mac · 01-12-2010, 08:58 PM

Quote:

Quote:
Originally Posted by cantfind1

I hate when midgets drive CSL's, it scares me a little!

Be careful what you say,as there's a couple on here.

I nearly said something ...... who's the other mate

**shimmy** · 01-12-2010, 10:52 PM

Quote:

Originally Posted by s.mac

I nearly said something ...... who's the other mate

Maybe just one then thinking about it!

sailorbaz · 02-12-2010, 07:43 AM

When I first got my CSL, I was happy enough with the seat position until one day, a year or so later I sat in the passenger side and thought it was better!!! I proceeded to whip the seat out and have a footer with it. It's now perfect for me and just wish I'd adjusted it before.

Remember it can recline/tilt a little too, and drop even further. Welcome BTW

cslgirl · 02-12-2010, 09:03 AM

Quote:

Originally Posted by BOUNCE

Be careful what you say,as there's a couple on here.

Is 5ft 2 and 3/4 a midget status?

Have never adjusted the seat in the CSL so not sure if it is on "midget" mode or not

petery · 02-12-2010, 06:31 PM

Quote:

Originally Posted by cslgirl

Is 5ft 2 and 3/4 a midget status?

Have never adjusted the seat in the CSL so not sure if it is on "midget" mode or not

well you had to mention the 3/4 bit so....................

01-12-2010, 04:54 PM	#1
petery S3 - On the open road Join Date: Sep 2010 Location: oxfordshire Posts: 109 Casino cash: $7423	Seat height The seat in my car has been raised by the previous owner by putting a spacer under the runner that bolts to the floor to raise the rear of the seat. Do these bolts have a nut on the bottom of them or are they in to a bush in the shell? I'm assuming that its not standard as the passenger seat runners sit on the floor.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-12-2010, 05:08 PM	#2
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	The nuts are welded to the chassis so you can undo the bolts no probs.

01-12-2010, 05:23 PM	#3
petery S3 - On the open road Join Date: Sep 2010 Location: oxfordshire Posts: 109 Casino cash: $7423	Thanks, removed the spacers big improvement, I can see out the windscreen with the sunvisor down now!

01-12-2010, 05:26 PM	#4
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	I hate when midgets drive CSL's, it scares me a little!