9.5J in the front

**alexk** · 15-11-2010, 09:53 PM

What is your opinion about 9.5J in the front ?

Does this has a negative effect on the steering rack by any chance ?

Cheers

shane@mbtech · 15-11-2010, 09:56 PM

Quote:

Originally Posted by alexk

What is your opinion about 9.5J in the front ?

Does this has a negative effect on the steering rack by any chance ?

Cheers

I ran 9j on 265 35 18, and had no issues,

It helped front end grip no end, but did cause some "tramlining effect", but that was no issue.

Others say it will affect the bearings, rack etc, but I ran 9j 265 35 18 for a long time with no issues whatsoever.

**glendog74** · 15-11-2010, 09:58 PM

Quote:

Originally Posted by alexk

What is your opinion about 9.5J in the front ?

Does this has a negative effect on the steering rack by any chance ?

Cheers

This is what i will run on track next year

DuncanR · 15-11-2010, 10:04 PM

T$ will respond soon with his ..."hair dryer" solution to wheel arch rubbing !!

**alexk** · 15-11-2010, 10:05 PM

Quote:

Originally Posted by glendog74

This is what i will run on track next year

What wheels mate ?

I am considering to get a set of BBS CH-R for the next season

DuncanR · 15-11-2010, 10:06 PM

Quote:

Originally Posted by alexk

What wheels mate ?

I am considering to get a set of BBS CH-R for the next season

Oooooo ! T$ will defo respond !!!

**shimmy** · 15-11-2010, 10:10 PM

Quote:

Originally Posted by glendog74

This is what i will run on track next year

I think you are running 9.0J next year. Inferior specification!

englebert · 15-11-2010, 10:19 PM

Are we talking about the rear CSL wheels on the front? Are they 9.5J?

**shimmy** · 15-11-2010, 10:46 PM

I trialed 9,5J on front using rear CSL rims but two issues!

1. Offset means it is almost impossible to run less than -3 camber. Even then they are tight on the outer arches

2. Stock wheel was a little heavy for my liking especially rear up front

**glendog74** · 16-11-2010, 12:10 AM

Quote:

Originally Posted by alexk

What wheels mate ?

I am considering to get a set of BBS CH-R for the next season

I have BBS E88 wheels with machined hubs to match E46 offset

15-11-2010, 09:53 PM	#1
alexk Driving it like I nicked it Join Date: Mar 2009 Posts: 2,785 Casino cash: $29970	9.5J in the front What is your opinion about 9.5J in the front ? Does this has a negative effect on the steering rack by any chance ? Cheers __________________ www.clubcsl.com - I am a BMW Motorsport fan ! My youtube channel is here

15-11-2010, 10:04 PM	#4
DuncanR CSL Register Uber-poster! Join Date: Sep 2009 Location: Olney, Bucks Posts: 3,735 Casino cash: $9984	T$ will respond soon with his ..."hair dryer" solution to wheel arch rubbing !! __________________ " I use Gleaming Kleen.... for that new car look " I wish I had used - Race Data Systems - Motorsport Data Loggers forgive me Nathan !

15-11-2010, 10:19 PM	#8
englebert S5 - Full Throttle Join Date: Jun 2008 Location: Kent Posts: 397 Casino cash: $705	Are we talking about the rear CSL wheels on the front? Are they 9.5J? __________________ '03 SG CSL - SOLD Making do with a CSL replica, 1M and E90 M3.

15-11-2010, 10:46 PM	#9
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	I trialed 9,5J on front using rear CSL rims but two issues! 1. Offset means it is almost impossible to run less than -3 camber. Even then they are tight on the outer arches 2. Stock wheel was a little heavy for my liking especially rear up front __________________ .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode