18 x 9.5J track wheels?

**glendog74** · 25-07-2010, 01:35 PM

I know a few of you run 18 x 9J for track wheels...

Has anyone had experience of 18 x 9.5J all round?

Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front)

shane@mbtech · 25-07-2010, 02:30 PM

Quote:

Originally Posted by glendog74

I know a few of you run 18 x 9J for track wheels...

Has anyone had experience of 18 x 9.5J all round?

Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front)

Depends on offset Rob, I reckon with a 27 offset they would be fine.

I run 265 35 18 on 9j rims with success, so 9.5 no advantage really for me.

**glendog74** · 25-07-2010, 06:09 PM

Quote:

Originally Posted by lawsy

Depends on offset Rob, I reckon with a 27 offset they would be fine.

Why ET27? Is that the optimum offset to avoid contact interference?

How about 18 x 10.5J ET28 on rears only with 18 x 9.5J ET41 on fronts?

Out of interest, what are the ETs on the standard CSL 19" Cup wheels?

chris mc · 25-07-2010, 06:26 PM

will this not cause the car to tramline or "track" quite badly?

**alexk** · 25-07-2010, 07:13 PM

Quote:

Originally Posted by glendog74

Out of interest, what are the ETs on the standard CSL 19" Cup wheels?

ET44 front
ET27 rear

Thank you please

**glendog74** · 25-07-2010, 07:18 PM

Quote:

Originally Posted by alexk

ET44 front
ET27 rear

Thank you please

Cheers Alex

shane@mbtech · 25-07-2010, 07:50 PM

With that offset you may be tucked in the arch a little, they might be perfect, just try them. Suck it and see.

It will look so schweet Rob

You have PM by the way.

**glendog74** · 25-07-2010, 08:00 PM

Quote:

Originally Posted by lawsy

With that offset you may be tucked in the arch a little, they might be perfect, just try them. Suck it and see.

It will look so schweet Rob

You have PM by the way.

Cheers mate - i should get away with it... Just

daniel · 25-07-2010, 08:20 PM

Given the clearance I have at 9" ET26 - 2.5 I would think you need an ET 30-32.

This picture is with slightly less camber, maybe -2

DuncanR · 26-07-2010, 09:36 AM

Quote:

Originally Posted by daniel

Given the clearance I have at 9" ET26 - 2.5 I would think you need an ET 30-32.

This picture is with slightly less camber, maybe -2

I have finally received my TD 18 X 9" et30's, just need to bang some rubber on them now !
Rob, you obviously not bothered about running 2 diff sizes then ?

25-07-2010, 01:35 PM	#1
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	18 x 9.5J track wheels? I know a few of you run 18 x 9J for track wheels... Has anyone had experience of 18 x 9.5J all round? Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front) __________________ Cha'mone Mother F**ker!

25-07-2010, 08:20 PM	#9
daniel S4 - Getting the hang of it Join Date: Sep 2009 Posts: 247 Casino cash: $11332	Given the clearance I have at 9" ET26 - 2.5 I would think you need an ET 30-32. This picture is with slightly less camber, maybe -2 Last edited by daniel; 25-07-2010 at 08:29 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25-07-2010, 06:26 PM	#4
chris mc Wonky 'L' after Washing Join Date: Mar 2010 Posts: 18 Casino cash: $10	will this not cause the car to tramline or "track" quite badly?

25-07-2010, 07:50 PM	#7
shane@mbtech CSL Register Uber-poster! Join Date: Feb 2009 Location: warrington Posts: 5,419 Casino cash: $19783	With that offset you may be tucked in the arch a little, they might be perfect, just try them. Suck it and see. It will look so schweet Rob You have PM by the way.