Roll Cage

The Gorilla · 26-12-2009, 02:35 PM

Hi,

Does anybody know if there is a
Multipoint Weld in Chromoloy Cage,
available for a E46 Coupe ?

Loads of CDS and a few T45 but can
not find Chromoloy for a E46 2 door ?

Regards,

The Gorilla.

Thorney · 27-12-2009, 12:22 AM

We use a combination of chromoly, T45 and 4130 in our cages, spec of exact lengths is up to you, but we will be releasing our own cages as a sel;f fit kit from end jan for mail order.

The Gorilla · 27-12-2009, 11:52 AM

Hi,

Many thanks for the reply.

Key question being, how much of your
kit is / will be, Chromoloy please ?

Regards,

The Gorilla.

_Nathan_ · 28-12-2009, 09:19 PM

Thorney - I thought 4130 was chromoly rather than a seperate material as you have listed, unless you meant CDS, T45 and 4130?

Mr Gorilla - Andy Robinson Race Cars will be able to do you a full 4130 one if you desire:

http://www.robinson-race-cars.co.uk/

Heard nothing but good things about them.

The Gorilla · 28-12-2009, 10:28 PM

Hi,

Nathan- Thanks for that, although I did
speak with them about a year ago
on a space frame Nickel/Chromoly front end
for a C36.

Their Basingstoke location is good for
the Primate as well .

Regards,

The Gorilla.

derek · 29-12-2009, 06:49 PM

a bit off topic but can you recommend a cage that is bolt in that has minimal impact on the car if it removed.

_Nathan_ · 29-12-2009, 07:51 PM

All of them will need some small plates welding in to stop them punching through the floor in the event of a roll but with the carpet back over no one would be able to tell that unless looking deeper than a casual inspection.

I think that the Safety Devices one John sells (or used to sell?) is as good as it gets for a bolt in, the weichers one is also good but worth checking what needs doing to it as I believe Shirmer makes a few mods to them before fitting and you need to specify a specific CSL fitment if you want to retain the rear side carbon panels from memory (was speaking to a dutch guy in the 'ring car park as he'd had one fitted to his).

Thorney · 30-12-2009, 12:30 AM

We supp,y a couple of bolt in cages but not a big fan unless you 'know' its not going to be raced. We do a variety of materials and tube guages.

26-12-2009, 02:35 PM	#1
The Gorilla S5, Sport Off, DSC M-track Join Date: Apr 2008 Posts: 740 Casino cash: $14401	Roll Cage Hi, Does anybody know if there is a Multipoint Weld in Chromoloy Cage, available for a E46 Coupe ? Loads of CDS and a few T45 but can not find Chromoloy for a E46 2 door ? Regards, The Gorilla.

27-12-2009, 12:22 AM	#2
Thorney S5 - Full Throttle Join Date: Sep 2007 Posts: 469 Casino cash: $3876	We use a combination of chromoly, T45 and 4130 in our cages, spec of exact lengths is up to you, but we will be releasing our own cages as a sel;f fit kit from end jan for mail order. __________________ http://www.thorneymotorsport.co.uk

30-12-2009, 12:30 AM	#8
Thorney S5 - Full Throttle Join Date: Sep 2007 Posts: 469 Casino cash: $3876	We supp,y a couple of bolt in cages but not a big fan unless you 'know' its not going to be raced. We do a variety of materials and tube guages. __________________ http://www.thorneymotorsport.co.uk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

27-12-2009, 11:52 AM	#3
The Gorilla S5, Sport Off, DSC M-track Join Date: Apr 2008 Posts: 740 Casino cash: $14401	Hi, Many thanks for the reply. Key question being, how much of your kit is / will be, Chromoloy please ? Regards, The Gorilla.

28-12-2009, 09:19 PM	#4
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	Thorney - I thought 4130 was chromoly rather than a seperate material as you have listed, unless you meant CDS, T45 and 4130? Mr Gorilla - Andy Robinson Race Cars will be able to do you a full 4130 one if you desire: http://www.robinson-race-cars.co.uk/ Heard nothing but good things about them.

28-12-2009, 10:28 PM	#5
The Gorilla S5, Sport Off, DSC M-track Join Date: Apr 2008 Posts: 740 Casino cash: $14401	Hi, Nathan- Thanks for that, although I did speak with them about a year ago on a space frame Nickel/Chromoly front end for a C36. Their Basingstoke location is good for the Primate as well . Regards, The Gorilla.

29-12-2009, 06:49 PM	#6
derek S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Scotland Posts: 1,159 Casino cash: $20658	a bit off topic but can you recommend a cage that is bolt in that has minimal impact on the car if it removed.

29-12-2009, 07:51 PM	#7
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	All of them will need some small plates welding in to stop them punching through the floor in the event of a roll but with the carpet back over no one would be able to tell that unless looking deeper than a casual inspection. I think that the Safety Devices one John sells (or used to sell?) is as good as it gets for a bolt in, the weichers one is also good but worth checking what needs doing to it as I believe Shirmer makes a few mods to them before fitting and you need to specify a specific CSL fitment if you want to retain the rear side carbon panels from memory (was speaking to a dutch guy in the 'ring car park as he'd had one fitted to his).