Torque setting for CSL road wheel nuts

mattCSLnut · 25-11-2009, 11:22 AM

As per thread title, what is the correct wheel bolt torque setting for the CSL ?

**TMAQ** · 25-11-2009, 11:27 AM

i use 84fp

old thread here...

http://www.cslregister.com/forum/sho...ghlight=Torque

mattCSLnut · 25-11-2009, 11:52 AM

Quote:

Originally Posted by TMAQ

i use 84fp

old thread here...

http://www.cslregister.com/forum/sho...ghlight=Torque

THANX

for the link. So 84fp would equal to about 115 Nm ? Will I be seeing U @ Brands tomorrow ?

**TMAQ** · 25-11-2009, 12:41 PM

Quote:

Originally Posted by mattCSLnut

THANX

for the link. So 84fp would equal to about 115 Nm ? Will I be seeing U @ Brands tomorrow ?

about 114 NM. Can't make Brands unfortunately

, car is now going in for a inspection 2. have a good one!!

mattCSLnut · 25-11-2009, 05:50 PM

Quote:

Originally Posted by TMAQ

about 114 NM. Can't make Brands unfortunately

, car is now going in for a inspection 2. have a good one!!

THANX m8. I'll try to document my shenanigans tomorrow

NZ_M3 · 25-11-2009, 11:14 PM

It's 88 ft/lb or 120NM +/- 10 actually according to BMW TIS

mattCSLnut · 25-11-2009, 11:45 PM

I rechecked all four wheel this afternoon and found the rears to have all 5 (per side) bolts in need of torque up. I'm glad I checked

**shimmy** · 26-11-2009, 12:17 AM

Quote:

Originally Posted by mattCSLnut

I rechecked all four wheel this afternoon and found the rears to have all 5 (per side) bolts in need of torque up. I'm glad I checked

quite a few of us have found that your wheel nuts are likely to come loose very quickly if youve just had your rims refurbed/painted. So if you have take extra care

mattCSLnut · 26-11-2009, 01:09 AM

Quote:

Originally Posted by shimmy

quite a few of us have found that your wheel nuts are likely to come loose very quickly if youve just had your rims refurbed/painted. So if you have take extra care

Well, she had all 4 of her wheels refurbed over a year ago ( under Rags ownership ) + NEW shoes fitted back in October '08. More recently, she's had an Inspection 2 @ Park Lane when I'm sure they would have had the wheels off to inspect the brakes / suspension / etc.. That was only 3000 miles ago, mid May '09. Strangely the fronts were perfectly tight, just not the rears but I'm glad I checked. Would have been totally embarrassing for the wheels to come off @ Brands

25-11-2009, 11:22 AM	#1
mattCSLnut CSL Register Uber-poster! Join Date: Sep 2009 Location: Cambridge Posts: 6,460 Casino cash: $27763	Torque setting for CSL road wheel nuts As per thread title, what is the correct wheel bolt torque setting for the CSL ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25-11-2009, 11:27 AM	#2
TMAQ S5, Sport Off, DSC M-track Join Date: Mar 2009 Location: Surrey Posts: 591 Casino cash: $2203	i use 84fp old thread here... http://www.cslregister.com/forum/sho...ghlight=Torque

25-11-2009, 11:14 PM	#6
NZ_M3 S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Auckland, New Zealand Posts: 1,434 Casino cash: $13579	It's 88 ft/lb or 120NM +/- 10 actually according to BMW TIS

25-11-2009, 11:45 PM	#7
mattCSLnut CSL Register Uber-poster! Join Date: Sep 2009 Location: Cambridge Posts: 6,460 Casino cash: $27763	I rechecked all four wheel this afternoon and found the rears to have all 5 (per side) bolts in need of torque up. I'm glad I checked