Problem .. What happend ?

flow · 21-05-2009, 11:28 AM

Hi all ,
Today i changed the air filter of my CSL but i discoverd something very odd

.

Look at the tube in the lower right .

Now look at this

Now look closer

So what is the function of this tube , i removed it now because i didn't fit anymore .

SpineOnABap · 21-05-2009, 12:04 PM

Think it's the air supply tube for when the main flap is closed.

**Mark CSL** · 21-05-2009, 12:10 PM

Quote:

Originally Posted by SpineOnABap

Think it's the air supply tube for when the main flap is closed.

Yip just like he said

It must have come loose i have not seen that before

NZ_M3 · 21-05-2009, 01:29 PM

Your airbox must have been taken apart before and wasn't put back properly.

That piece (item 9 below) is attached to the snorkle part (item 1 below) of the airbox which in turn must slot into an induction pipe (item 10 below) that's bolted to the chassis leg and which is then fed into a foam pipe (not numbered, snail looking thing next to item label 15 below) and bolted to the back of the bumper.

Very easy error to make if you don't know what you are doing or is simply careless when installing the snorkle.

You want to order part number
11 61 7 833 646
should be about 15.90 Euro

Here's what it should look like:

**Andyk** · 21-05-2009, 09:27 PM

Thats not good....

flow · 21-05-2009, 09:55 PM

Thanks for the help .
I'll go and order a new"tube" at the dealer .

sailorbaz · 24-05-2009, 03:40 PM

You were lucky the belt never snapped! Well spotted though.

**glendog74** · 24-05-2009, 05:54 PM

Glad you noticed that before something went snap!

Engine bay could do with a clean though...

flow · 24-05-2009, 08:17 PM

Quote:

Originally Posted by glendog74

Glad you noticed that before something went snap!

Engine bay could do with a clean though...

I know ,
I just bought the car recently and it will be fully detailed next month

.
Today i did a quick fix of the tube with some tape because i have booked a trackday next week @SPA and the part is in backorder

.

TANKSLAPPER · 24-05-2009, 08:22 PM

Quote:

Originally Posted by flow

i have booked a trackday next week @SPA.

Who is running the trackday ?

21-05-2009, 11:28 AM	#1
flow S4 - Getting the hang of it Join Date: Feb 2009 Location: Belgium Posts: 176 Casino cash: $9921	Problem .. What happend ? Hi all , Today i changed the air filter of my CSL but i discoverd something very odd . Look at the tube in the lower right . Now look at this Now look closer So what is the function of this tube , i removed it now because i didn't fit anymore . __________________ '04 996 GT3 MK2 CS '03 CSL '12 Megane RS265

21-05-2009, 09:27 PM	#5
Andyk Driving it like I nicked it Space Invaders Champion! Join Date: May 2008 Location: Chepstow Posts: 2,506 Casino cash: $3997	Thats not good.... __________________

21-05-2009, 09:55 PM	#6
flow S4 - Getting the hang of it Join Date: Feb 2009 Location: Belgium Posts: 176 Casino cash: $9921	Thanks for the help . I'll go and order a new"tube" at the dealer . __________________ '04 996 GT3 MK2 CS '03 CSL '12 Megane RS265

24-05-2009, 05:54 PM	#8
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	Glad you noticed that before something went snap! Engine bay could do with a clean though... __________________ Cha'mone Mother F**ker!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21-05-2009, 12:04 PM	#2
SpineOnABap S5, Sport Off, DSC M-track Join Date: May 2008 Location: Earth Posts: 561 Casino cash: $5714	Think it's the air supply tube for when the main flap is closed.

21-05-2009, 01:29 PM	#4
NZ_M3 S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Auckland, New Zealand Posts: 1,434 Casino cash: $13579	Your airbox must have been taken apart before and wasn't put back properly. That piece (item 9 below) is attached to the snorkle part (item 1 below) of the airbox which in turn must slot into an induction pipe (item 10 below) that's bolted to the chassis leg and which is then fed into a foam pipe (not numbered, snail looking thing next to item label 15 below) and bolted to the back of the bumper. Very easy error to make if you don't know what you are doing or is simply careless when installing the snorkle. You want to order part number 11 61 7 833 646 should be about 15.90 Euro Here's what it should look like: