|
Register | FAQ | Donate | Members List | Calendar | Arcade | Casino | vBGarage | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
23-09-2019, 01:12 PM | #1 |
S2 - Picking it up
Join Date: Feb 2011
Posts: 71
Casino cash: $977 |
Rev's hunting at idle
The rev fluctuate at idle like someone is gently pressing the throttle.
Does this sound like a vanos solenoid issue? I'll check for codes but i don't think there are any. |
31-10-2019, 09:13 PM | #2 |
S2 - Picking it up
Join Date: Feb 2011
Posts: 71
Casino cash: $977 |
I replaced the Vanos solenoid and gasket but the hunting issue still remains.
Has anyone experienced this? |
31-10-2019, 11:40 PM | #3 |
CSL Register Uber-poster!
Join Date: Nov 2009
Location: Cornwall
Posts: 7,057
Casino cash: $35793 |
Turn the air con off and see if it still happens
|
01-11-2019, 09:09 PM | #4 |
S2 - Picking it up
Join Date: May 2015
Posts: 59
Casino cash: $4159 |
Had these symptoms earlier this year and it was the front TPS.
|
10-11-2019, 05:11 PM | #6 |
S2 - Picking it up
Join Date: Feb 2011
Posts: 71
Casino cash: $977 |
|
11-11-2019, 09:58 PM | #7 |
S2 - Picking it up
Join Date: May 2015
Posts: 59
Casino cash: $4159 |
|
12-01-2020, 07:29 AM | #8 |
S5, Sport Off, DSC M-track
Join Date: Oct 2009
Location: Sydney Australia
Posts: 675
Casino cash: $6490 |
You get this sorted?
Have you done a vanos pressure check? Should be up around 1500-1600psi |
13-01-2020, 02:16 PM | #9 | |
S2 - Picking it up
Join Date: Feb 2011
Posts: 71
Casino cash: $977 |
Quote:
How would you measure the vanos pressure? I did get an error code "Inlet VANOS, advance valve" via PA Soft. So i thought i might replace the TPS but knowing my luck if it is the TPS it will the one below the airbox. |
|
14-01-2020, 07:19 AM | #10 |
S5, Sport Off, DSC M-track
Join Date: Oct 2009
Location: Sydney Australia
Posts: 675
Casino cash: $6490 |
https://youtu.be/YqYD03Ec8js
I'd also run vanos test with Diagnostics. Hunting at idle generally caused by a vanos issue. Seeing that you have a code as well seems a great place to start. Vanos pressure very important. Low pressure cams will not move or be lazy. Will also cause issues with shifting with SMG as both ECUs are not seeing what they expect. |
Thread Tools | |
Display Modes | |
|
|