|
Register | FAQ | Donate | Members List | Calendar | Arcade | Casino | vBGarage | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
10-03-2014, 11:02 PM | #1 |
Wonky 'L' after Washing
Join Date: Feb 2014
Posts: 3
Casino cash: $456 |
vanos exhaust hub
Quick question if both tabs break on the exhaust hub and the oil pump disc stops spinning will the car still start and drive?
|
12-03-2014, 12:13 AM | #2 |
S4 - Getting the hang of it
Join Date: Nov 2009
Location: West Sussex
Posts: 155
Casino cash: $5680 |
Yes it will, but be careful. The last one I saw had jumped a tooth on the inlet cam where a tab had gone between the chain and the cam sprocket. If this happens you will get a tell tale hole in the cam cover and a score down the side of the head. I have some pictures somewhere...
|
12-03-2014, 12:16 AM | #3 |
S4 - Getting the hang of it
Join Date: Nov 2009
Location: West Sussex
Posts: 155
Casino cash: $5680 |
|
12-03-2014, 02:19 AM | #4 |
Wonky 'L' after Washing
Join Date: Feb 2014
Posts: 3
Casino cash: $456 |
Mine looked the same but the garage has got it retimed and running dint know if he's checked the vanos hub.
|
12-03-2014, 11:53 PM | #5 |
S4 - Getting the hang of it
Join Date: Nov 2009
Location: West Sussex
Posts: 155
Casino cash: $5680 |
It'll run if it has jumped a tooth on the inlet cam. Not right, but it'll run.
|
13-03-2014, 05:37 PM | #6 |
Wonky 'L' after Washing
Join Date: Feb 2014
Posts: 3
Casino cash: $456 |
The car is running nice since it was retimed it was the tensioner the failed, but I was wondering if both tabs were broken and the oil pump disc was not spinning would the car still start and drive
|
13-03-2014, 08:13 PM | #7 |
S4 - Getting the hang of it
Join Date: Nov 2009
Location: West Sussex
Posts: 155
Casino cash: $5680 |
It will, but the engine management light would come on after a short while as the cam positions are monitored and they won't move as the dme asks them to.
|
27-03-2014, 08:17 PM | #8 |
S2 - Picking it up
Join Date: Sep 2013
Posts: 40
Casino cash: $400 |
|
Thread Tools | |
Display Modes | |
|
|