Assistance on MAP sensor

[m3dragon]

I did a search and I am probably tying the wring criteria.

Can anyone please assist me in figuring out the MAP sensor.

1. Could you post a image of it
2. Where does the wire harness for the MAP sensor connect?
3. Do you know or can you help me figure out the needed part number?

Thank you in advance

[cantfind1]

http://alexroyphotography.com/e46m3b...l/IMG_1175.jpg

it sit on top op the air rail at the rear of the engine.

Wires into one of two engine looms which plug into the ecu....

[m3dragon]

Thanks cantfind1

I have the map sensor and map rail. I would like some images of the part installed and any information of how it is wired to the DME.

Anyone have that information by chance?

[m3dragon]

Anyone???

I am tying to find the part number now for the connector that plugs into the sensor and how it is wired to the DME. I can't find it on realoem

Anyone???

[NZ_M3]

If you do a search I posted a photo for another member of the connector plug part number quite a while back.

Also the wiring diagram is under SSP-SP0000022670 - Intake air temperature/intake pressure sensor.

[m3dragon]

Originally Posted by NZ_M3

If you do a search I posted a photo for another member of the connector plug part number quite a while back.

Also the wiring diagram is under SSP-SP0000022670 - Intake air temperature/intake pressure sensor.

Thank you NZ. I did a search and must be using the wrong criteria. I will search you posts.

Thank you for the wire info.

[m3dragon]

http://www.cslregister.com/forum/showthread.php?t=10351

The best I could find is that thread. I search for "Map sensor" and get nada. Does it have a different name?

http://realoem.com/bmw/showparts.do?...13&fg=15&hl=15

I have the rail and sensor but not the plugs. Can't find them anywhere. Can you supply the part numbers or the thread please.

[NZ_M3]

Here:

http://www.cslregister.com/forum/sho...ght=MAP+Sensor

[m3dragon]

Thank you sir.

Odd that thread does not come up when I search here.

[NZ_M3]

Originally Posted by m3dragon

Thank you sir.

Odd that thread does not come up when I search here.

Strange ... it was 5th on the list when I did my search ...

And Because I am feeling generous today here's the wiring diagram (given you probably don't have access to an ISTA machine so you probably won't be able to pull this diagram). So don't say we aren't helpful And don't act like Cossack and start calling us names on the other forum