Correct Flap Operation??!

RichW · 11-11-2008, 09:33 PM

Suffering problems with the dreaded inlet flap - at first i thought it was stuck shut, so had a look about and read that one way of testing it was to get someone to rev the car to around 3500rpm whilst looking at the flap.

In this scenario it appears to operate fine.

However! When out on the road the car is still noticably quieter than it should be, so i decided to conduct a couple of tests; Whilst driving the car hard at around 4-5000rpm, i noted that theres no change in sound whilst turning the sport button on and off. Second test i did was to leave the sport button off, and allow the car to rev out to 7000rpm. When ive done this before at around 6000rpm there is a noticable change in sound as the flap opens - again, this time no change in sound!

Any ideas to what the problem could be?? Seems the flap isnt opening when it should be, though clearly the motors fine, unless the inlet pressure is too great for it to open against because its faulty?!

SpineOnABap · 11-11-2008, 10:18 PM

Why don't you just remove the thing? It's only purpose is noise reduction and removal takes about 5 minutes. Get it done and never worry again

GT TWO · 11-11-2008, 11:13 PM

My mate put the diagnostic on it the other day and showed me it working by running a test, very cool.

It had brought up a couple of faults in the memory. I think these flaps are regularly causing issues.

RichW · 12-11-2008, 08:01 AM

The cars under warranty, otherwise i would just be removing it. Juat want to get it right in my own head what the problem is before taking it in to them - its quite a drive and if its a £5 part then i'd rather buy it myself

cslbecks · 12-11-2008, 10:59 AM

Are there definitely NO issues with removing the flap altogether???

RichW · 12-11-2008, 01:42 PM

From what i can gather theres no issues - certainly from my own experience the time you will get det is when your driving a car hard, and that being the case, you'd be in sport mode anyway

SpineOnABap · 12-11-2008, 03:03 PM

There are definitely NO issues with removing the flap. All it does is noise surpression (their way of getting around the noise regs I guess).
There's no impact on anything else.

cslbecks · 12-11-2008, 03:09 PM

great - thanks spine

RichW · 12-11-2008, 05:26 PM

Sounds good to me

englebert · 12-11-2008, 08:11 PM

My flap was costing me 30bhp, it was only opening right at the top of the rev range. So, i can assure you are way down on paper, get it off.

11-11-2008, 09:33 PM	#1
RichW S5 - Full Throttle Join Date: Oct 2008 Location: East Yorkshire, UK Posts: 268 Casino cash: $314	Correct Flap Operation??! Suffering problems with the dreaded inlet flap - at first i thought it was stuck shut, so had a look about and read that one way of testing it was to get someone to rev the car to around 3500rpm whilst looking at the flap. In this scenario it appears to operate fine. However! When out on the road the car is still noticably quieter than it should be, so i decided to conduct a couple of tests; Whilst driving the car hard at around 4-5000rpm, i noted that theres no change in sound whilst turning the sport button on and off. Second test i did was to leave the sport button off, and allow the car to rev out to 7000rpm. When ive done this before at around 6000rpm there is a noticable change in sound as the flap opens - again, this time no change in sound! Any ideas to what the problem could be?? Seems the flap isnt opening when it should be, though clearly the motors fine, unless the inlet pressure is too great for it to open against because its faulty?! __________________ http://www.lancermods.co.uk

11-11-2008, 11:13 PM	#3
GT TWO S4 - Getting the hang of it Join Date: Oct 2008 Location: Surrey Posts: 144 Casino cash: $634	My mate put the diagnostic on it the other day and showed me it working by running a test, very cool. It had brought up a couple of faults in the memory. I think these flaps are regularly causing issues. __________________ www.cagedcar.com

12-11-2008, 08:01 AM	#4
RichW S5 - Full Throttle Join Date: Oct 2008 Location: East Yorkshire, UK Posts: 268 Casino cash: $314	The cars under warranty, otherwise i would just be removing it. Juat want to get it right in my own head what the problem is before taking it in to them - its quite a drive and if its a £5 part then i'd rather buy it myself __________________ http://www.lancermods.co.uk

12-11-2008, 10:59 AM	#5
cslbecks S4 - Getting the hang of it Join Date: Oct 2008 Location: London, Essex Posts: 178 Casino cash: $250	Are there definitely NO issues with removing the flap altogether??? __________________ SG 04

12-11-2008, 01:42 PM	#6
RichW S5 - Full Throttle Join Date: Oct 2008 Location: East Yorkshire, UK Posts: 268 Casino cash: $314	From what i can gather theres no issues - certainly from my own experience the time you will get det is when your driving a car hard, and that being the case, you'd be in sport mode anyway __________________ http://www.lancermods.co.uk

11-11-2008, 10:18 PM	#2
SpineOnABap S5, Sport Off, DSC M-track Join Date: May 2008 Location: Earth Posts: 561 Casino cash: $5714	Why don't you just remove the thing? It's only purpose is noise reduction and removal takes about 5 minutes. Get it done and never worry again

12-11-2008, 03:03 PM	#7
SpineOnABap S5, Sport Off, DSC M-track Join Date: May 2008 Location: Earth Posts: 561 Casino cash: $5714	There are definitely NO issues with removing the flap. All it does is noise surpression (their way of getting around the noise regs I guess). There's no impact on anything else.

12-11-2008, 03:09 PM	#8
cslbecks S4 - Getting the hang of it Join Date: Oct 2008 Location: London, Essex Posts: 178 Casino cash: $250	great - thanks spine __________________ SG 04

12-11-2008, 05:26 PM	#9
RichW S5 - Full Throttle Join Date: Oct 2008 Location: East Yorkshire, UK Posts: 268 Casino cash: $314	Sounds good to me __________________ http://www.lancermods.co.uk

12-11-2008, 08:11 PM	#10
englebert S5 - Full Throttle Join Date: Jun 2008 Location: Kent Posts: 397 Casino cash: $705	My flap was costing me 30bhp, it was only opening right at the top of the rev range. So, i can assure you are way down on paper, get it off. __________________ '03 SG CSL - SOLD Making do with a CSL replica, 1M and E90 M3.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intermittent flap failure	Gastro	Technical Area	2	09-06-2008 05:57 PM