FS: Breaking M3 - eBay Parts Blowout!!!

Craig · 03-03-2010, 12:53 AM

Right guys, I really, really hate waste and it bugs me if I have to throw parts out that might be of some use to someone. So I've spent all afternoon putting all the dregs from my broken down CSL on eBay.

Everythings at 99p + P&P, if you need anything that is listed feel free to PM me on here and I shall remove it from eBay. But, after 10 days I'm afraid what doesn't sell will be binned.

http://shop.ebay.co.uk/cmp_racing/m....&_trksid=p4340

Only parts that haven't been listed yet are drive shafts, upper wishbones, rear trailing arms, lower wishbone, side glass and a scratched rear bumper. These will be put one once I've got some pictures!

E-Mail: craig@cmpracing.co.uk
Phone: 07737 384557

CT1 · 04-03-2010, 01:17 PM

Hi Craig have you got the metal brackets that sit below the exhaust tunnel in the middle of the car. They are approx 10 inches x 4 inches

Tks

CT

rstoughy · 04-03-2010, 03:17 PM

You still have the Rear exhaust mounts Craig?

We never did reach a deal on them

Craig · 04-03-2010, 04:53 PM

I sent you an e-mail back about the mounts, I binned them the other month as they didn't look perfect (looked crinkled inside). Damn, damn, damn lol.

Same as above CT1, just binned them thought no one would ever need those!!

CT1 · 09-03-2010, 11:04 AM

Quote:

Originally Posted by Craig

Same as above CT1, just binned them thought no one would ever need those!!

Never mind!

Another item have you got the 2 x bottom rear suspension links?

Regards

CT

03-03-2010, 12:53 AM	#1
Craig S5 - Full Throttle Join Date: Jun 2009 Location: Guisborough Posts: 453 Casino cash: $4472	FS: Breaking M3 - eBay Parts Blowout!!! Right guys, I really, really hate waste and it bugs me if I have to throw parts out that might be of some use to someone. So I've spent all afternoon putting all the dregs from my broken down CSL on eBay. Everythings at 99p + P&P, if you need anything that is listed feel free to PM me on here and I shall remove it from eBay. But, after 10 days I'm afraid what doesn't sell will be binned. http://shop.ebay.co.uk/cmp_racing/m....&_trksid=p4340 Only parts that haven't been listed yet are drive shafts, upper wishbones, rear trailing arms, lower wishbone, side glass and a scratched rear bumper. These will be put one once I've got some pictures! E-Mail: craig@cmpracing.co.uk Phone: 07737 384557 Last edited by Craig; 03-03-2010 at 01:06 AM.

04-03-2010, 03:17 PM	#3
rstoughy S6, Sport On, Traction Off Join Date: Jun 2008 Location: Aberdeenshire Posts: 1,947 Casino cash: $25387	You still have the Rear exhaust mounts Craig? We never did reach a deal on them __________________ Paul. Ooooft!!! 15yrs in the CSL and still loving it "shine on you crazy diamond"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-03-2010, 01:17 PM	#2
CT1 Mode S1 - Starting Out Join Date: Feb 2010 Posts: 25 Casino cash: $1310	Hi Craig have you got the metal brackets that sit below the exhaust tunnel in the middle of the car. They are approx 10 inches x 4 inches Tks CT

04-03-2010, 04:53 PM	#4
Craig S5 - Full Throttle Join Date: Jun 2009 Location: Guisborough Posts: 453 Casino cash: $4472	I sent you an e-mail back about the mounts, I binned them the other month as they didn't look perfect (looked crinkled inside). Damn, damn, damn lol. Same as above CT1, just binned them thought no one would ever need those!!