Oil weeping between head and block

Brendanmck · 17-04-2020, 01:10 AM

Hi all . I’m currently changing the belts on the front of engine when I noticed small amount of oil has been gathering on top of the air con compressor so after cleaning it up and further investigation I’ve discovered the source of the oil seems to be weeping from between the head and the block just ahead of the first port of the exhaust manifold. Is this cause for concern or is this the result of the car not being driven very often.any thoughts much appreciated.
Thanks.

Monkey · 04-05-2020, 10:49 AM

Hi Brendan,

There's a number of areas that the oil may be coming from, but the easiest to check and most common is the timing chain guide retaining bolt behind the oil filter housing. If you look down between the cylinder head and oil filter housing you will see a black headed bolt (can't remember what size), pop an open ended spanner down there and see if it's loose.
As the engine is leaning over it tracks round the head gasket and drips on the the A/C compressor.

If not might be worth buying some brake cleaner, clean off the whole area then run the engine and see if you can identify the source.

Let me know how you get on.

17-04-2020, 01:10 AM	#1
Brendanmck S4 - Getting the hang of it Join Date: May 2012 Location: co Armagh Posts: 134 Casino cash: $1644	Oil weeping between head and block Hi all . I’m currently changing the belts on the front of engine when I noticed small amount of oil has been gathering on top of the air con compressor so after cleaning it up and further investigation I’ve discovered the source of the oil seems to be weeping from between the head and the block just ahead of the first port of the exhaust manifold. Is this cause for concern or is this the result of the car not being driven very often.any thoughts much appreciated. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-05-2020, 10:49 AM	#2
Monkey S5 - Full Throttle Join Date: May 2013 Location: Haywards Heath Posts: 266 Casino cash: $7387	Hi Brendan, There's a number of areas that the oil may be coming from, but the easiest to check and most common is the timing chain guide retaining bolt behind the oil filter housing. If you look down between the cylinder head and oil filter housing you will see a black headed bolt (can't remember what size), pop an open ended spanner down there and see if it's loose. As the engine is leaning over it tracks round the head gasket and drips on the the A/C compressor. If not might be worth buying some brake cleaner, clean off the whole area then run the engine and see if you can identify the source. Let me know how you get on.