Front Bumper Prep

GregorFuk · 02-02-2015, 03:11 PM

So, I’m about to get my front bumper re-sprayed but on looking at it it’s clear this won’t be the first time it’s been sprayed, or second, or third, or fourth or……. You catch my drift, it’s thick with paint. So before putting it down for yet another coat of paint it seems like it might be a good idea to take some of the previous layers off.

Has anybody done this before? Do they have any tips? Is the whole idea a big no, no? Is any sort of media blasting safe? Or is the only option to roll up my sleeves and get busy with some sand paper?

Cheers

Gregor

**shimmy** · 02-02-2015, 03:28 PM

good question......will be interested to hear what the others say that have done this.

**PeteGray** · 02-02-2015, 04:11 PM

I'm afraid that my response is one of those useless ones which frequent BB's, however, I do have some expensive experience here.

After wanting to secure a second front bumper for my car I came across a genuine one that required a small amount of remedial work to correct a few cracks and bits and bobs to get it perfect before respraying.

The bodyshop that did the work for me said that the bumper itself is very strong and of a high quality. They found there to be a few finer, potentially more fragile area's, however, around the carbon fibre joins and specifically on the clips where the front plastic radiator protector grill attaches to the bumper.

They stripped it back to bare before respraying and had no issues. So as I say this is a bit useless as I do not know what method they used to remove the paint, but as they are a 'normal' local repair garage I'd stay it was a standard one.

They did laugh a lot at the price I paid for my non perfect front bumper (£2000) and even more so at the near £4000 for a brand new one.

s.mac · 02-02-2015, 04:31 PM

Get your sanding disc out, having seen more than enough paint jobs on the race car.... Sand back, gives you chance to sort any imperfections. Primer then paint

s.mac · 02-02-2015, 04:34 PM

Don't just use any sand paper ..!!

Easiest, take to paint shop you trust, £200/350 should get you a lovely looking bumper, depending how bad it is.

**Mark CSL** · 02-02-2015, 08:01 PM

Sanding it back is best
Removing the old coats of paint that builds up over the years can cause problems
also less paint on it makes it less likely to chip easy

Neil M · 03-02-2015, 09:51 AM

Quote:

Originally Posted by PeteGray

They did laugh a lot at the price I paid for my non perfect front bumper (£2000) and even more so at the near £4000 for a brand new one.

Here's one to practice on:
http://www.ebay.co.uk/itm/1816559455...%3AMEBIDX%3AIT That'll take a bit of sanding.

**shimmy** · 03-02-2015, 10:01 AM

My spare Cost £350 and included a grille and two splitters and a crack above the number plate

**Mark CSL** · 03-02-2015, 10:16 AM

Quote:

Originally Posted by shimmy

My spare Cost £350 and included a grille and two splitters and a crack above the number plate

Great investment shimmy worth more than Gold at the moment
They stopped making the MG ZR rear bumper and when it had a small bump
they were wrighting the car off if the CSL is the same your bumper will be worth a fortune

02-02-2015, 03:11 PM	#1
GregorFuk S5 - Full Throttle Join Date: Nov 2014 Posts: 318 Casino cash: $11097	Front Bumper Prep So, I’m about to get my front bumper re-sprayed but on looking at it it’s clear this won’t be the first time it’s been sprayed, or second, or third, or fourth or……. You catch my drift, it’s thick with paint. So before putting it down for yet another coat of paint it seems like it might be a good idea to take some of the previous layers off. Has anybody done this before? Do they have any tips? Is the whole idea a big no, no? Is any sort of media blasting safe? Or is the only option to roll up my sleeves and get busy with some sand paper? Cheers Gregor

02-02-2015, 03:28 PM	#2
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	good question......will be interested to hear what the others say that have done this. __________________ .

02-02-2015, 08:01 PM	#6
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	Sanding it back is best Removing the old coats of paint that builds up over the years can cause problems also less paint on it makes it less likely to chip easy __________________ www.procarkits.co.uk

03-02-2015, 10:01 AM	#8
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	My spare Cost £350 and included a grille and two splitters and a crack above the number plate __________________ .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-02-2015, 04:11 PM	#3
PeteGray S4 - Getting the hang of it Join Date: Apr 2014 Posts: 135 Casino cash: $3932	I'm afraid that my response is one of those useless ones which frequent BB's, however, I do have some expensive experience here. After wanting to secure a second front bumper for my car I came across a genuine one that required a small amount of remedial work to correct a few cracks and bits and bobs to get it perfect before respraying. The bodyshop that did the work for me said that the bumper itself is very strong and of a high quality. They found there to be a few finer, potentially more fragile area's, however, around the carbon fibre joins and specifically on the clips where the front plastic radiator protector grill attaches to the bumper. They stripped it back to bare before respraying and had no issues. So as I say this is a bit useless as I do not know what method they used to remove the paint, but as they are a 'normal' local repair garage I'd stay it was a standard one. They did laugh a lot at the price I paid for my non perfect front bumper (£2000) and even more so at the near £4000 for a brand new one.

02-02-2015, 04:31 PM	#4
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	Get your sanding disc out, having seen more than enough paint jobs on the race car.... Sand back, gives you chance to sort any imperfections. Primer then paint

02-02-2015, 04:34 PM	#5
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	Don't just use any sand paper ..!! Easiest, take to paint shop you trust, £200/350 should get you a lovely looking bumper, depending how bad it is.