CSL Register

Go Back   CSL Register > General > Technical Area

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 20-03-2013, 07:44 PM   #1
portlandgrey
S4 - Getting the hang of it
 

Join Date: Jan 2010
Posts: 153
Casino cash: $8449
portlandgrey is on a distinguished road
Default Cannot set rear camber

I've just had the rear floorpan replaced by BMW & while the axle was off I had new OEM RTAB's & a turner limiter kit fitted, along with all new axle carrier bushes.

In the KDS print, the rear camber is out - it should be 1,5 & is actually measuring 1.18 & 1.33. Dealer says its due to the limiter kit & there is now not enough adjustment available.
Does this sound correct?

Also the front 20degree castor is out - the target spec is 7.48, mine is actually 6.58 & 7.03.

The car feels floaty at the front & not at all connected to the back.

Any advice welcome.
portlandgrey is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:51 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk