CSL bodyshell stress crack - warning!

21-03-2009, 11:20 AM

An update, with pictures

1. image one shows the crack and the weak spot weld welded up.

2. shows the reinforceing plate in position ready to weld.

3. shows the plate seam and plug welded into position.

4. shows the welds ground down ready for etching primer.

5. o/s rear mount.

6. n/s rear mount.

7. a coat of underbody colour on top of etch primer.

8. o/s rear all painted up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

21-03-2009, 11:20 AM	#8
Steve Gill Guest Posts: n/a Casino cash: $	An update, with pictures 1. image one shows the crack and the weak spot weld welded up. 2. shows the reinforceing plate in position ready to weld. 3. shows the plate seam and plug welded into position. 4. shows the welds ground down ready for etching primer. 5. o/s rear mount. 6. n/s rear mount. 7. a coat of underbody colour on top of etch primer. 8. o/s rear all painted up.