EML caused by high flow CATs

**Mike R** · 29-01-2014, 02:09 PM

When-ever I drive like a girl, my EML light comes on due to the higher flow nature of the Supersprint CATs. Sometimes it turns itself off, or invariably I have to have Gareth switch it off.

However, while it is on, it always in the back of my mind that I could be driving it thinking everything is okay and it is just the CATs when it is actually another issue.

I have three options:
1. Buy the BMW software and keep turning it off.
2. Take it to someone like Evolve and have the sensitivity of the particular sensor turned down so that it doesn't trip out.
3. Fit one of these in between the exhaust and the sensor (which is supposed to reduce the flow to it, this prevent it from tripping out):
http://www.ebay.co.uk/itm/Adjustable...item3a83b08246

Anyone had any experiences of the above and what do most peeps think is best?

29-01-2014, 02:09 PM	#1
Mike R S6, Sport On, Traction Off Join Date: Dec 2010 Location: Norwich Posts: 1,585 Casino cash: $17591	EML caused by high flow CATs When-ever I drive like a girl, my EML light comes on due to the higher flow nature of the Supersprint CATs. Sometimes it turns itself off, or invariably I have to have Gareth switch it off. However, while it is on, it always in the back of my mind that I could be driving it thinking everything is okay and it is just the CATs when it is actually another issue. I have three options: 1. Buy the BMW software and keep turning it off. 2. Take it to someone like Evolve and have the sensitivity of the particular sensor turned down so that it doesn't trip out. 3. Fit one of these in between the exhaust and the sensor (which is supposed to reduce the flow to it, this prevent it from tripping out): http://www.ebay.co.uk/itm/Adjustable...item3a83b08246 Anyone had any experiences of the above and what do most peeps think is best? __________________ Mike R Sarcasm is just a free service I provide. Nordschleife, there's only two barriers to worry about - the ones on the left and the ones on the right . CSL number 044

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode