18"track wheels

CLAYTON · 07-02-2011, 10:30 AM

Hi all can anyone help me im running 18"m3 wheels for he track with 265 toyo 888s want to run wheel spacers on the rear i have -1 neg camber on OEM suspension dose anyone no what size i can run any advise appreciated im going to he ring easter anyone else ?

**shimmy** · 07-02-2011, 10:49 AM

Quote:

Originally Posted by CLAYTON

Hi all can anyone help me im running 18"m3 wheels for he track with 265 toyo 888s want to run wheel spacers on the rear i have -1 neg camber on OEM suspension dose anyone no what size i can run any advise appreciated im going to he ring easter anyone else ?

For OEM 18's the offset is 47mm Front & 26mm Rear, they are 9.0J rims and with 265 tyres assuming they are 35 prodfile and not bigger at the rear you could run at least 12mm and probably 15mm

pkumarm3 · 07-02-2011, 03:34 PM

-1 camber? jeez!

have any of you considered upgrading the rear control arms - Ground Control, Turner Motorsports, Rogue Engineering all make control arms that will allow you to increase rear camber with a simple spanner.

you can go as wide as 10 inch on stock suspension.i have seen 18x10 on et25 enkei

_Nathan_ · 07-02-2011, 03:46 PM

Don't need to upgrade the rear control arms to increase camber.

CSL has alloy control arms as standard too, lighter than the M3 ones.

I'm running turner ones as they are supposed to be stronger.

CLAYTON · 07-02-2011, 05:54 PM

Hi yes the OEM 18" are 9j with 265 35 running 9j all round -3.5 caber on the front what do standard rear adjust to? The tyres seem to wear perfect on the rear at -1 maybe i need to go a bit faster i meet a guy at the ring last year he said with 12mm spacers on the rear thay will rubb unless i have -2 but then he did have a m3 with neon lights under the car and it didnt move from the car park like a lot of them lol

**shimmy** · 07-02-2011, 06:01 PM

Quote:

Originally Posted by CLAYTON

Hi yes the OEM 18" are 9j with 265 35 running 9j all round -3.5 caber on the front what do standard rear adjust to? The tyres seem to wear perfect on the rear at -1 maybe i need to go a bit faster i meet a guy at the ring last year he said with 12mm spacers on the rear thay will rubb unless i have -2 but then he did have a m3 with neon lights under the car and it didnt move from the car park like a lot of them lol

12mm rear spacers with 9.5J et27 dont rub, indeed neither do 15mm as far as i know, so you should be fine by a country mile as your rims are only 1mm pushed futher out but the smaller rim width will narrow the 265 tyres a bit anyway.

DuncanR · 07-02-2011, 07:23 PM

iM RUNNING -3.5 FRONT AND -2.25 REAR, STD CSL WHEELS WITH 10MM SPACERS F & R NO RUBBING FOOK CAPS

**glendog74** · 07-02-2011, 07:26 PM

Quote:

Originally Posted by DuncanR

iM RUNNING -3.5 FRONT AND -2.25 REAR, STD CSL WHEELS WITH 10MM SPACERS F & R NO RUBBING FOOK CAPS

The OP is asking about the wider 18" wheels you fuck-knuckle!

DuncanR · 07-02-2011, 07:28 PM

Quote:

Originally Posted by glendog74

The OP is asking about the wider 18" wheels you fuck-knuckle!

nOW LISTEN HERE YOU WOMANS GENITAL AREA ! I DONT GIVE A FLYING FOOK WHAT HES ASKING ...THATS WHAT IM RUNNING !!!

**glendog74** · 07-02-2011, 07:32 PM

Quote:

Originally Posted by DuncanR

nOW LISTEN HERE YOU WOMANS GENITAL AREA ! I DONT GIVE A FLYING FOOK WHAT HES ASKING ...THATS WHAT IM RUNNING !!!

You stressed?

07-02-2011, 10:30 AM	#1
CLAYTON S3 - On the open road Join Date: Nov 2008 Location: essex Posts: 98 Casino cash: $3999	18"track wheels Hi all can anyone help me im running 18"m3 wheels for he track with 265 toyo 888s want to run wheel spacers on the rear i have -1 neg camber on OEM suspension dose anyone no what size i can run any advise appreciated im going to he ring easter anyone else ? Last edited by CLAYTON; 07-02-2011 at 10:34 AM. Reason: oem setup

07-02-2011, 03:46 PM	#4
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	Don't need to upgrade the rear control arms to increase camber. CSL has alloy control arms as standard too, lighter than the M3 ones. I'm running turner ones as they are supposed to be stronger. __________________ Nathan

07-02-2011, 07:23 PM	#7
DuncanR CSL Register Uber-poster! Join Date: Sep 2009 Location: Olney, Bucks Posts: 3,735 Casino cash: $9984	iM RUNNING -3.5 FRONT AND -2.25 REAR, STD CSL WHEELS WITH 10MM SPACERS F & R NO RUBBING FOOK CAPS __________________ " I use Gleaming Kleen.... for that new car look " I wish I had used - Race Data Systems - Motorsport Data Loggers forgive me Nathan !

07-02-2011, 03:34 PM	#3
pkumarm3 S2 - Picking it up Join Date: Jan 2009 Location: USA Posts: 41 Casino cash: $700	-1 camber? jeez! have any of you considered upgrading the rear control arms - Ground Control, Turner Motorsports, Rogue Engineering all make control arms that will allow you to increase rear camber with a simple spanner. you can go as wide as 10 inch on stock suspension.i have seen 18x10 on et25 enkei

07-02-2011, 05:54 PM	#5
CLAYTON S3 - On the open road Join Date: Nov 2008 Location: essex Posts: 98 Casino cash: $3999	Hi yes the OEM 18" are 9j with 265 35 running 9j all round -3.5 caber on the front what do standard rear adjust to? The tyres seem to wear perfect on the rear at -1 maybe i need to go a bit faster i meet a guy at the ring last year he said with 12mm spacers on the rear thay will rubb unless i have -2 but then he did have a m3 with neon lights under the car and it didnt move from the car park like a lot of them lol