Seat height

petery · 01-12-2010, 04:54 PM

The seat in my car has been raised by the previous owner by putting a spacer under the runner that bolts to the floor to raise the rear of the seat. Do these bolts have a nut on the bottom of them or are they in to a bush in the shell?

I'm assuming that its not standard as the passenger seat runners sit on the floor.

**cantfind1** · 01-12-2010, 05:08 PM

The nuts are welded to the chassis so you can undo the bolts no probs.

petery · 01-12-2010, 05:23 PM

Thanks, removed the spacers big improvement, I can see out the windscreen with the sunvisor down now!

**cantfind1** · 01-12-2010, 05:26 PM

I hate when midgets drive CSL's, it scares me a little!

Bounce · 01-12-2010, 08:35 PM

Quote:

Originally Posted by cantfind1

I hate when midgets drive CSL's, it scares me a little!

Be careful what you say,as there's a couple on here.

s.mac · 01-12-2010, 08:58 PM

Quote:

Quote:
Originally Posted by cantfind1

I hate when midgets drive CSL's, it scares me a little!

Be careful what you say,as there's a couple on here.

I nearly said something ...... who's the other mate

**shimmy** · 01-12-2010, 10:52 PM

Quote:

Originally Posted by s.mac

I nearly said something ...... who's the other mate

Maybe just one then thinking about it!

sailorbaz · 02-12-2010, 07:43 AM

When I first got my CSL, I was happy enough with the seat position until one day, a year or so later I sat in the passenger side and thought it was better!!! I proceeded to whip the seat out and have a footer with it. It's now perfect for me and just wish I'd adjusted it before.

Remember it can recline/tilt a little too, and drop even further. Welcome BTW

cslgirl · 02-12-2010, 09:03 AM

Quote:

Originally Posted by BOUNCE

Be careful what you say,as there's a couple on here.

Is 5ft 2 and 3/4 a midget status?

Have never adjusted the seat in the CSL so not sure if it is on "midget" mode or not

petery · 02-12-2010, 06:31 PM

Quote:

Originally Posted by cslgirl

Is 5ft 2 and 3/4 a midget status?

Have never adjusted the seat in the CSL so not sure if it is on "midget" mode or not

well you had to mention the 3/4 bit so....................

01-12-2010, 04:54 PM	#1
petery S3 - On the open road Join Date: Sep 2010 Location: oxfordshire Posts: 109 Casino cash: $7423	Seat height The seat in my car has been raised by the previous owner by putting a spacer under the runner that bolts to the floor to raise the rear of the seat. Do these bolts have a nut on the bottom of them or are they in to a bush in the shell? I'm assuming that its not standard as the passenger seat runners sit on the floor.

01-12-2010, 05:08 PM	#2
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	The nuts are welded to the chassis so you can undo the bolts no probs.

01-12-2010, 05:23 PM	#3
petery S3 - On the open road Join Date: Sep 2010 Location: oxfordshire Posts: 109 Casino cash: $7423	Thanks, removed the spacers big improvement, I can see out the windscreen with the sunvisor down now!

01-12-2010, 05:26 PM	#4
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	I hate when midgets drive CSL's, it scares me a little!