AP Bell thickness & OEM bolts

daniel · 20-09-2010, 09:21 PM

Hi,

Just fitted a set of AP brakes

and have encountered a problem with the bolt lengths. It looks like the AP bells are thicker than the OEM disc bells and now I can only get approx 3.75 turns (hand tight) on the oem bolts before having to torque them up. Does anybody know the exact thickness difference between the two as I didn't manage to measure them.

And for those with APs are you using the standard bolts?

Thanks

**shimmy** · 20-09-2010, 09:27 PM

Quote:

Originally Posted by daniel

Hi,

Just fitted a set of AP brakes

and have encountered a problem with the bolt lengths. It looks like the AP bells are thicker than the OEM disc bells and now I can only get approx 3.75 turns (hand tight) on the oem bolts before having to torque them up. Does anybody know the exact thickness difference between the two as I didn't manage to measure them.

And for those with APs are you using the standard bolts?

Thanks

I think all AP kits come with AP bells and AP bolts. You may need to buy the bells.

daniel · 20-09-2010, 09:32 PM

I have the whole kit and it is mounted, but the bells are thicker which pushes the wheel further out.

Haven't you noticed this?

s.mac · 20-09-2010, 09:33 PM

Quote:

And for those with APs are you using the standard bolts?

Im on standard bolts and not noticed anything

daniel · 20-09-2010, 09:36 PM

Quote:

Originally Posted by s.mac

Im on standard bolts and not noticed anything

Do you know how many turns you are getting on the bolts?

_Nathan_ · 20-09-2010, 09:36 PM

I used standard bolts too before moving to studs.

**shimmy** · 20-09-2010, 09:37 PM

Quote:

Originally Posted by daniel

I have the whole kit and it is mounted, but the bells are thicker which pushes the wheel further out.

Haven't you noticed this?

Sorry I thought you meant bell bolts, not wheel bolts.

The standard bolts should fit, mine do. The two locating grub screws should fit flush and tge locating pins also sit flush. If they don't then you either haven't mounted it properly or have been given the wrong bells.

s.mac · 20-09-2010, 09:40 PM

Quote:

Do you know how many turns you are getting on the bolts?

no sorry but Im sure its more than you're getting, If I remember I will check tomorrow

daniel · 20-09-2010, 10:10 PM

Quote:

Originally Posted by shimmy

Sorry I thought you meant bell bolts, not wheel bolts.

The standard bolts should fit, mine do. The two locating grub screws should fit flush and tge locating pins also sit flush. If they don't then you either haven't mounted it properly or have been given the wrong bells.

I have CR2494-1589 stamped on one of them. Does that tell you anything?

**shimmy** · 20-09-2010, 10:49 PM

No, haven't got the catalogue.

Could it be CP2494-1589?

20-09-2010, 09:21 PM	#1
daniel S4 - Getting the hang of it Join Date: Sep 2009 Posts: 247 Casino cash: $11332	AP Bell thickness & OEM bolts Hi, Just fitted a set of AP brakes and have encountered a problem with the bolt lengths. It looks like the AP bells are thicker than the OEM disc bells and now I can only get approx 3.75 turns (hand tight) on the oem bolts before having to torque them up. Does anybody know the exact thickness difference between the two as I didn't manage to measure them. And for those with APs are you using the standard bolts? Thanks

20-09-2010, 09:36 PM	#6
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	I used standard bolts too before moving to studs. __________________ Nathan

20-09-2010, 10:49 PM	#10
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	No, haven't got the catalogue. Could it be CP2494-1589? __________________ .

20-09-2010, 09:32 PM	#3
daniel S4 - Getting the hang of it Join Date: Sep 2009 Posts: 247 Casino cash: $11332	I have the whole kit and it is mounted, but the bells are thicker which pushes the wheel further out. Haven't you noticed this?