not quite F/S front and rear callipers

[s.mac]

Just giving the heads up for my old callipers that I have nearly finished re furbing

I have to replace the bleed nipples and copper piping, not a big job.

I have also got the rubber dust seals on route from the USA (just hope they are the right ones)
The callipers are 4 pots, front and rear
They are Ferrari F40 type callipers made by Rotora
I have also ordered new braided hoses front and rear as I kept the hoses for my AP install.
I am undecided if I will supply pads, I will just add the price of the pads to the for sale price, I know people prefer different pads
The kit is for standard M3 disk sizes which I ran with on my CSL, you can buy the bracket for CSL size front disks, about $200, rears are the same size as M3 so nothing needed there, they will bolt straight on.
I ran PF M3 disks front and rear and I was more than happy with the set up.

The colour is a darker yellow, as in 1st pic
2nd pic must be the light as it looks too pale
and they need a wipe down and polish as they have been sat at my mates garage for a while, took me a bit to sort the dust seals out





the reason Im giving the heads up is if any one is interested on here they may want me to sort the brackets out which may take a couple of weeks, again added to the sell price.
£1,500.00 for all 4 callipers plus bits on top.

David CH mentioned an interest but I havent seen him post anywhere for ages.

This is just the heads up, anyone interested please pm me, these will not be sold until fully sorted.

Unlike the tw-t who sold me the AP's

[phat///M3]

Steve I think David is on M3Cutters quite a bit, so worth PM'ing him there maybe.

[shimmy]

Steve

I've got his mobile if you want me to ask him?

[s.mac]

thanks guys I will try a pm 1st over on cutters, cheers

[glendog74]

What's all this 'Cutters'? A pastry shapes site?

[TANKSLAPPER]

Originally Posted by glendog74

What's all this 'Cutters'? A pastry shapes site?

:h ahaha: