M3 V8 Carbon CCC Trim in the making

[Mark CSL]

This was a part i am making for a m8 with a M3 V8
Sand the part then cut the carbon
then resin the part and lat the carbon on the parts and into the vacume bag for 8 hours

[Mark CSL]

Day 2 sanded down and more resin applied

[Mark CSL]

part 3
sand some more to get a nice flat surface then more resin

[Mark CSL]

Part 4
More sanding
Then 3 coats of clear applied to give it that deep wet look
I will post some pix tomorrow of the part put back together

[DazBlackCSL]

Marky those bits and all your carbon stuff looks mint ..

Need to get moving on some rear C63 AMG Diffusers !!

[AlexGTT]

Very nice work Mark.

However, you should know better than to use deep and wet to describe anything on here!

[alexk]

Very nice Mark !

[Mark CSL]

Originally Posted by DazBlackCSL

Marky those bits and all your carbon stuff looks mint ..

Need to get moving on some rear C63 AMG Diffusers !!

do you have the part daz ? picture

Originally Posted by AlexGTT

Very nice work Mark.

However, you should know better than to use deep and wet to describe anything on here!

yes i normaly keep that for the mens room

Originally Posted by alexk

Very nice Mark !

Thanks Alex

[DazBlackCSL]

Originally Posted by Mark CSL

do you have the part daz ? picture

Part is on the car, well the std part anyway !

[Mark CSL]

Is the middle picture the original part ?
if so i could do it