Oil diverter valve - Page 3

**Mark CSL** · 21-08-2014, 12:12 AM

Think its just the oil filter housing you need to remove derek
not sure if the intake manifold needs removed

Have a look where it bolts on before you strip it all off

derek · 26-08-2014, 10:57 PM

Quote:

Originally Posted by Mark CSL

Think its just the oil filter housing you need to remove derek
not sure if the intake manifold needs removed

Have a look where it bolts on before you strip it all off

All fitted no need to take off intake manifold. Air filter box required to be removed fan was already off, remove power steering pulley and alternator for access. It's 6 bolts that need to be removed for the OFH removal. Track night tomorrow hopefully it's a bit cooler.

billyboysm3 · 27-08-2014, 09:09 AM

So with this fitted I take it you need to warm up the oil/car before you drive anywhere?

derek · 27-08-2014, 09:23 AM

Quote:

Originally Posted by billyboysm3

So with this fitted I take it you need to warm up the oil/car before you drive anywhere?

Taken car to work this morning for trackday tonight water temp came up the same this morning sitting between blue mark and first white dot. Oil temp just took a few miles to temp but sitting about 70 degrees. This was on motorway run about 70mph on 50 mile run guages didn't move during the run . Looking hopeful for tonight and forecast dry.

billyboysm3 · 27-08-2014, 11:44 AM

Cool, also taken M3 to work to run her in for next Monday.

derek · 28-08-2014, 01:25 PM

Car on track last night oil temp was 100 degress and water temp was middle of the gauge. Last time on track temp reached red and oil temp was 125 and car wasnt been driven as hard, so looks like good results with mods to keep temperatures down. Also took 0.5 previous best time in car now with 1.5 secs of csl and car was about 5 mph slower at end of straights than csl.

billyboysm3 · 28-08-2014, 02:03 PM

I think you really need to chuck it in that hairpin!!

derek · 28-08-2014, 02:05 PM

Quote:

Originally Posted by billyboysm3

How many miles is knockhill track?

It 1.3 miles but more than 2/3 is flat out

derek · 12-09-2014, 11:21 PM

Quote:

Originally Posted by shimmy

so just 50kg heavier, 22bhp less power, but np holes barred!

you'll be within 0.5sec before long for sure.

Track night tonight now 1 sec slower than CSL. m3 still 5 mph slower on straight but no difference on twisties.

21-08-2014, 12:12 AM	#21
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	Think its just the oil filter housing you need to remove derek not sure if the intake manifold needs removed Have a look where it bolts on before you strip it all off __________________ www.procarkits.co.uk

28-08-2014, 02:03 PM	#27
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,001 Casino cash: $25206	I think you really need to chuck it in that hairpin!! Last edited by billyboysm3; 28-08-2014 at 02:07 PM.

27-08-2014, 09:09 AM	#23
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,001 Casino cash: $25206	So with this fitted I take it you need to warm up the oil/car before you drive anywhere?

27-08-2014, 11:44 AM	#25
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,001 Casino cash: $25206	Cool, also taken M3 to work to run her in for next Monday.

28-08-2014, 01:25 PM	#26
derek S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Scotland Posts: 1,159 Casino cash: $20658	Car on track last night oil temp was 100 degress and water temp was middle of the gauge. Last time on track temp reached red and oil temp was 125 and car wasnt been driven as hard, so looks like good results with mods to keep temperatures down. Also took 0.5 previous best time in car now with 1.5 secs of csl and car was about 5 mph slower at end of straights than csl.