Wheel speed sensor - Page 4

**shimmy** · 05-10-2013, 04:39 PM

Quote:

Originally Posted by _Nathan_

Cool, you running on my spare set at moment then?

Can't wait to see what the 4 ways are like, gonna be difficult to know what has made the different though!

No, Nigel stripped both front shocks, one had seized due to being parked up too long after rain I guess.

You'll hate the 4 way until you manage to get it set up. Luckily you'll have help. Then it will be lovely

_Nathan_ · 05-10-2013, 04:47 PM

Just copy the damper settings from the other car as a starter for 10.

Deffo gonna use it soon! Get yer cheque book out and join me

**shimmy** · 05-10-2013, 04:48 PM

Quote:

Originally Posted by _Nathan_

Just copy the damper settings from the other car as a starter for 10.

Deffo gonna use it soon! Get yer cheque book out and join me

Forgot you had a mule car......

Will need somebody else's chequebook at the mo

**shimmy** · 05-10-2013, 08:30 PM

Had a look at both sensors and NSF has a couplke of dodgy looking bits but seems ok really. Ill have to get both sensors monday and see if it cures it.

Fluid is to the top still.

Yanto · 05-10-2013, 09:54 PM

Quote:

Originally Posted by shimmy

call it Khama, but had this light come up today (just yellow brake light, this is image from google)

Any guesses before I gets it fault code read on Monday?

I think the bottom light is the hubba bubba warning light mate.

Impacts forward visibility....hence warning.

Fix is to lower drivers window and launch chewy out of car.

adem.csl · 06-10-2013, 05:51 PM

Shimmy don't forget to leave ignition in second position and just wait 10-15 secs for the light to go out its self that resets the pad sensor wear indecators you might try that first if they have boon unplugged and not plugged back in properly
That light usually indecates from pads are worn!!!

**shimmy** · 06-10-2013, 06:35 PM

Quote:

Originally Posted by adem.csl

Shimmy don't forget to leave ignition in second position and just wait 10-15 secs for the light to go out its self that resets the pad sensor wear indecators you might try that first if they have boon unplugged and not plugged back in properly
That light usually indecates from pads are worn!!!

Cheers, saw that on YT.

I've taken off front wear sensor as even if not faulty, it looked a bit dodgy. I'll replace Tuesday and reset and see what's what. I'll buy the rear as el just incase.

Not pad wear as they are not connected to the RS29

shane@mbtech · 06-10-2013, 09:27 PM

Quote:

Originally Posted by _Nathan_

The ABS unit knows they are there without the wheels moving so no need to do this IME.

Running the MK60 ABS standalone now

Yes but if you have a faulty sensor and it causes the light to come on, if you fit a new sensor the light will usually not go out until either a, you erase the fault codes or b, drive the car.

adem.csl · 08-10-2013, 12:52 AM

Quote:

Originally Posted by lawsy

Yes but if you have a faulty sensor and it causes the light to come on, if you fit a new sensor the light will usually not go out until either a, you erase the fault codes or b, drive the car.

I agree the light should go out after driving because it sees no fault!!

**shimmy** · 08-10-2013, 01:16 AM

picked up a nice shiney new front sensor today from a friendly face and plan to fit it tomorrow morning and see if the fault goes away on the brakes

watch this space

05-10-2013, 04:47 PM	#32
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	Just copy the damper settings from the other car as a starter for 10. Deffo gonna use it soon! Get yer cheque book out and join me __________________ Nathan

05-10-2013, 08:30 PM	#34
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	Had a look at both sensors and NSF has a couplke of dodgy looking bits but seems ok really. Ill have to get both sensors monday and see if it cures it. Fluid is to the top still. __________________ .

06-10-2013, 05:51 PM	#36
adem.csl S5, Sport On, DSC M-track Join Date: Sep 2012 Location: north london Posts: 1,012 Casino cash: $7218	Shimmy don't forget to leave ignition in second position and just wait 10-15 secs for the light to go out its self that resets the pad sensor wear indecators you might try that first if they have boon unplugged and not plugged back in properly That light usually indecates from pads are worn!!! __________________ Bmw in the blood!!

08-10-2013, 01:16 AM	#40
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	picked up a nice shiney new front sensor today from a friendly face and plan to fit it tomorrow morning and see if the fault goes away on the brakes watch this space __________________ .