Rear Console in dry carbon - Page 6

Sapphire csl · 17-02-2013, 04:21 AM

Any details on rocker cover yet?

KamalRostov · 17-02-2013, 06:16 AM

+1 for the rocker cover too

**cantfind1** · 17-02-2013, 09:23 AM

+1 for rocker cover....need it delivered to OZ though if that is possible??

NZ_M3 · 17-02-2013, 11:05 PM

One thing at a time guys

There's no point of me ordering moulds to be made when his current workloads means more than a month to get a mould done

I have however finalised the pricing on the "Gloss" finished rear console ...

£335 is the best I can get him to do it guys .. and we are looking at April production with his current load of work.

So those no longer keen please let me know.

Neil M · 18-02-2013, 12:13 PM

Tom - Tangents just you just love them

That's good news on the consoles, they're good to go.
PM when you want some money.

lee · 21-02-2013, 08:59 PM

Tom can you add me down for a rear console

Thanks

Shoggy · 23-02-2013, 10:18 AM

Hi Tom, can you put me down for the rear console also?

0-60Motorsports · 23-02-2013, 06:18 PM

Any pics and time of completion? I might be interested too.

NZ_M3 · 28-02-2013, 12:03 AM

Hi all

Slightly bad news ... I am going to have to put this group buy on hold for a moment as the guy that I had lined up to make this has been quite difficult to deal with and hasn't turned out to be the person I was told he was originally.

I've been scratching my head over this one as for some reason he's willing to let this reasonably sized order (and future orders) go without any justifiable reason. Basically I think he has way too much work on and he can't be bothered with such a small console (there's probably bigger margins for him in making motorsport bumpers, doors, boots, hood and roof) - I honestly don't know.

Not all is lost however, I have another builder of the same caliber, but he's located on the opposite end of the Country to me, similarly priced and his work just as good if not better. He is however booked up with work until end of April, so I am going to have another crack with him and see if he can squeez this in earlier given the size of the order.

Alternatively I've also been provided another source by another friend. Apparently this guy used to work for the Sauber F1 team and did carbon fiber work for them - he now lives in New Zealand and works for a big super yacht company here. He is luckily located in the same town as me, so I will go and approach him and see if he has the time and willingness to take on this work.

Bear with me and apologies again. Will keep all updated

Neil M · 28-02-2013, 04:41 PM

No problem, it's managed without one since it came off the production line in 03, what's a few more weeks/months in the scale of things.

17-02-2013, 06:16 AM	#52
KamalRostov S3 - On the open road Join Date: Jan 2012 Location: Malaysia Posts: 99 Casino cash: $3395	+1 for the rocker cover too __________________ 2006 Euro A08 E46 M3

17-02-2013, 11:05 PM	#54
NZ_M3 S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Auckland, New Zealand Posts: 1,434 Casino cash: $13579	One thing at a time guys There's no point of me ordering moulds to be made when his current workloads means more than a month to get a mould done I have however finalised the pricing on the "Gloss" finished rear console ... £335 is the best I can get him to do it guys .. and we are looking at April production with his current load of work. So those no longer keen please let me know. Last edited by NZ_M3; 17-02-2013 at 11:13 PM.

18-02-2013, 12:13 PM	#55
Neil M Driving it like I nicked it Join Date: Jan 2012 Location: Manchester Posts: 2,340 Casino cash: $19143	Tom - Tangents just you just love them That's good news on the consoles, they're good to go. PM when you want some money. __________________ “With the CSL, BMW have achieved The Ultimate Driving Machine” SG CSL '051'

23-02-2013, 06:18 PM	#58
0-60Motorsports S5 - Full Throttle Join Date: Aug 2008 Location: Kingdom of Bahrain Posts: 481 Casino cash: $3271	Any pics and time of completion? I might be interested too. __________________ EURO 04 M3 Current Mods: GC Coilovers, Eibach Sways, RE RCA?s, VCSL Bumper, OE CSL Boot, VCSL CF Rear Diffusor, DIETZ TV in Motion, SS Stepped Headers and catless, SS Res X Pipe, SS Race exhaust, OEM CSL Steering + interior, OEM CSL Intake, MSS54HP with HTE Tune, BBS CH's/LM?s FX-R Projectors + night breakers, STOPTECH ST60/40, RE Front strut brace, DINAN Rear Strut Brace,

28-02-2013, 04:41 PM	#60
Neil M Driving it like I nicked it Join Date: Jan 2012 Location: Manchester Posts: 2,340 Casino cash: $19143	No problem, it's managed without one since it came off the production line in 03, what's a few more weeks/months in the scale of things. __________________ “With the CSL, BMW have achieved The Ultimate Driving Machine” SG CSL '051' Last edited by Neil M; 28-02-2013 at 10:05 PM.

17-02-2013, 04:21 AM	#51
Sapphire csl Mode S1 - Starting Out Join Date: Feb 2013 Posts: 23 Casino cash: $586	Any details on rocker cover yet?

17-02-2013, 09:23 AM	#53
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	+1 for rocker cover....need it delivered to OZ though if that is possible??

21-02-2013, 08:59 PM	#56
lee S2 - Picking it up Join Date: Mar 2012 Posts: 77 Casino cash: $18601	Tom can you add me down for a rear console Thanks

23-02-2013, 10:18 AM	#57
Shoggy S2 - Picking it up Join Date: Aug 2011 Location: France Posts: 36 Casino cash: $3984	Hi Tom, can you put me down for the rear console also?

28-02-2013, 12:03 AM	#59
NZ_M3 S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Auckland, New Zealand Posts: 1,434 Casino cash: $13579	Hi all Slightly bad news ... I am going to have to put this group buy on hold for a moment as the guy that I had lined up to make this has been quite difficult to deal with and hasn't turned out to be the person I was told he was originally. I've been scratching my head over this one as for some reason he's willing to let this reasonably sized order (and future orders) go without any justifiable reason. Basically I think he has way too much work on and he can't be bothered with such a small console (there's probably bigger margins for him in making motorsport bumpers, doors, boots, hood and roof) - I honestly don't know. Not all is lost however, I have another builder of the same caliber, but he's located on the opposite end of the Country to me, similarly priced and his work just as good if not better. He is however booked up with work until end of April, so I am going to have another crack with him and see if he can squeez this in earlier given the size of the order. Alternatively I've also been provided another source by another friend. Apparently this guy used to work for the Sauber F1 team and did carbon fiber work for them - he now lives in New Zealand and works for a big super yacht company here. He is luckily located in the same town as me, so I will go and approach him and see if he has the time and willingness to take on this work. Bear with me and apologies again. Will keep all updated