AP Racing Discs

[shimmy]

They look awful but looks can be deceiving. I am no expert but I thought wear was measured on disc overall thickness and then you have to take corrosion and disc eveness into consideration.

The lip on the edge looks pretty large so I'd guess they don't have much life left but the grooves look ok.

[Deezer-D]

Originally Posted by shimmy

They look awful but looks can be deceiving. I am no expert but I thought wear was measured on disc overall thickness and then you have to take corrosion and disc eveness into consideration.

The lip on the edge looks pretty large so I'd guess they don't have much life left but the grooves look ok.

Cheers shimmy. Looks like new discs and pads then. I bought them knowing the discs would probably need replacing so I'll bite the bullet and get some. Looks like I might have a bit of fun getting the old discs off the bells!

Cheers
D

[shane@mbtech]

Originally Posted by Deezer-D

Cheers shimmy. Looks like new discs and pads then. I bought them knowing the discs would probably need replacing so I'll bite the bullet and get some. Looks like I might have a bit of fun getting the old discs off the bells!

Cheers
D

Preparation is key

Then the bolts will come off no probs

[shimmy]

Originally Posted by Deezer-D

. Looks like I might have a bit of fun getting the old discs off the bells!

Cheers
D

tbh what i wish id done first time is buy new bells to then you can mount them at your leisure and remove the others some time when you feel like it, no rush

at the end of the day theyd sell so no big waste

loads of wd40, good fitting spanners and allen keys and maybe some heat

Originally Posted by lawsy

Preparation is key

Then the bolts will come off no probs

the first set i did i got so frustrated after rounding the third allen key, i remember hitting the disc with my big lump hammer and splitting it in two

[shane@mbtech]

Use snap on tools too

Before you wd40, wire brush them and get rid of the shit first

[Deezer-D]

Cheers guys, I'm going to price up a pair complete with bells and as shimmy says I can remove the old ones at any time. I can always sell the spare bells. Anyone any idea how much complete discs and bells are?

[daniel]

Does anybody know the price of bells by any chance?

[shimmy]

Originally Posted by Deezer-D

Cheers guys, I'm going to price up a pair complete with bells and as shimmy says I can remove the old ones at any time. I can always sell the spare bells. Anyone any idea how much complete discs and bells are?

Originally Posted by daniel

Does anybody know the price of bells by any chance?

ring questmead monday morning, they will tell you

im guessing £110 each

[Deezer-D]

I've emailed Steve for prices but will follow up with a phone call in the morning.

Anyone know how the Caliper brackets attach to hub? There are 2 threaded holes in each bracket but I only have one spare bolt as per the pic above.
Cheers
D

[daniel]

Have a look here to see what you have or don't have
http://www.apracing.com/drawings/p12136.pdf