thoughts about track rims and tyres - Page 8

TANKSLAPPER · 13-11-2009, 06:36 PM

Quote:

Originally Posted by shimmy

the 9.5J look spot on, i think you missed a trick not getting 9.5J all round making tyre wear and wheel swap dead easy (although you loose that 0.5 inch of rear grip)

I already had the two 10J ch's, I will test the new 9.5J on the front first then on the back with a wider spacers. If it works I will buy another two 9.5J then I can swap them around.

daniel · 15-11-2009, 12:36 PM

Tankslapper - Are those photos with the clubsport coilover? Do you get any rubbing anywhere with the 265/35 tyres

TANKSLAPPER · 15-11-2009, 12:45 PM

Quote:

Originally Posted by sunnybono

Tankslapper - Are those photos with the clubsport coilover? Do you get any rubbing anywhere with the 265/35 tyres

Yes there with KW clubsport coilover. their is no rubbing but I have not been on track yet.

The cup tyre size I'm using is 19 x 265/30

daniel · 15-11-2009, 04:43 PM

Thanks for the feedback. I am going to try with tyres that have 2cm larger diameter which maybe an issue.

TANKSLAPPER · 15-11-2009, 06:49 PM

Quote:

Originally Posted by sunnybono

Thanks for the feedback. I am going to try with tyres that have 2cm larger diameter which maybe an issue.

That will be an issue, sorry.

daniel · 15-11-2009, 06:54 PM

Quote:

Originally Posted by TANKSLAPPER

That will be an issue, sorry.

Not good. I thought some people got away with 265/35/19 or even 255/40/18 which are pretty much the same diameter.

**alexk** · 28-11-2009, 10:11 AM

Do you think I stand a chance if I put 19x8.5 ET20 in the front ?

**shimmy** · 28-11-2009, 10:17 AM

Quote:

Originally Posted by alexk

Do you think I stand a chance if I put 19x8.5 ET20 in the front ?

so same as standard except 25mm less offset and therefore pushed 25mm further out to the wheel arch. Based on the fact that with 15mm+ spacers the tyre seems to foul the arches my guess is on standard geo you will not be able to do this on road.

You may just squeeze the on with 3 deg neg camber for track work!!

TANKSLAPPER · 28-11-2009, 10:34 AM

I run BBS ch's 19 x 8.5 x et35 with a 12mm spacer on the front which is = to et23 with no problems at all.

The tyre & the wheel was inside of the front arch so 3mm more wouldn't make any difference.

The only down side is pushing the inside of the wheel a further out by 25mm over standard makes the car dart around particularly over bumps as it put more leverage on the steering and it tramp lines more.

**shimmy** · 28-11-2009, 11:02 AM

Quote:

Originally Posted by TANKSLAPPER

I run BBS ch's 19 x 8.5 x et35 with a 12mm spacer on the front which is = to et23 with no problems at all.

The tyre & the wheel was inside of the front arch so 3mm more wouldn't make any difference.

The only down side is pushing the inside of the wheel a further out by 25mm over standard makes the car dart around particularly over bumps as it put more leverage on the steering and it tramp lines more.

what camber though TS?

28-11-2009, 10:11 AM	#77
alexk Driving it like I nicked it Join Date: Mar 2009 Posts: 2,786 Casino cash: $29971	Do you think I stand a chance if I put 19x8.5 ET20 in the front ? __________________ www.clubcsl.com - I am a BMW Motorsport fan ! My youtube channel is here

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15-11-2009, 12:36 PM	#72
daniel S4 - Getting the hang of it Join Date: Sep 2009 Posts: 247 Casino cash: $11332	Tankslapper - Are those photos with the clubsport coilover? Do you get any rubbing anywhere with the 265/35 tyres

15-11-2009, 04:43 PM	#74
daniel S4 - Getting the hang of it Join Date: Sep 2009 Posts: 247 Casino cash: $11332	Thanks for the feedback. I am going to try with tyres that have 2cm larger diameter which maybe an issue.

28-11-2009, 10:34 AM	#79
TANKSLAPPER S5, Sport Off, DSC M-track Join Date: Nov 2008 Posts: 801 Casino cash: $8979	I run BBS ch's 19 x 8.5 x et35 with a 12mm spacer on the front which is = to et23 with no problems at all. The tyre & the wheel was inside of the front arch so 3mm more wouldn't make any difference. The only down side is pushing the inside of the wheel a further out by 25mm over standard makes the car dart around particularly over bumps as it put more leverage on the steering and it tramp lines more.