Interior Re-finishing

s3jwl · 12-01-2014, 09:45 AM

Hi All

I am new to the forum and CSL's. I purchased a 70k mile car last week which needs a little TLC to get the interior as i want it .

Can anyone recommend somebody to re-upholster the steering wheel, console between the back seats and back of the driver and passenger seat .

I was think of having the seats and steering wheel plastic painted or wrapped and there are a couple of german companies on ebay who cover the steering wheels .

I can buy all of the parts new although a thousand quid for something that doesn't really need doing and just me being a fussy git .

I'm in the process if fitting brand new disks and pads all round ( OEM BMW ) as they are quite rusty. The rears are good condition ( pads nearly new ) other than rust if anyone is interested in the old. The front ones are grooved quite badly .

Any help appreciated

Thanks and love the car. A 10 year old car shouldn't be this good ?!

digi · 12-01-2014, 01:36 PM

just buy the carbon bits from Mark on here. They look fab.

s3jwl · 12-01-2014, 02:03 PM

Bit of a stickler for the standard look i'm afraid although appreciate the advice. Ciao

digi · 12-01-2014, 02:14 PM

you did mention wrapped. Though you were looking for carbon look or something.

If you intent to respray, they are quite easy to do. I resprayed my door handles and smg surround. Was easy and never looked back as they still look fresh and OEM.

s3jwl · 12-01-2014, 02:19 PM

do you know what colour code i need to use, if i get it resprayed. i think spraying sounds like the best idea to me.

Thanks again

**glendog74** · 12-01-2014, 02:35 PM

Welcome to the forum

I'll be sending my spare steering wheel to these guys:

http://royalsteeringwheels.com

s3jwl · 12-01-2014, 02:41 PM

your the second person to recommend these people and a BIG thanks. I will get off to them next week and will leave some feedback here.

Thanks and appreciate it

s.mac · 12-01-2014, 05:40 PM

Shimmy had some interior parts sprayed, I'm sure he will tell you where. No one has managed to do the seat backs

**Mike R** · 12-01-2014, 05:51 PM

Quote:

Originally Posted by s.mac

Shimmy had some interior parts sprayed, I'm sure he will tell you where. No one has managed to do the seat backs

Elms did my seat back and repaired my rear centre console

.

s.mac · 12-01-2014, 05:53 PM

Normal paint? How much did they charge?

12-01-2014, 09:45 AM	#1
s3jwl Wonky 'L' after Washing Join Date: Jan 2014 Location: Essex Posts: 7 Casino cash: $290	Interior Re-finishing Hi All I am new to the forum and CSL's. I purchased a 70k mile car last week which needs a little TLC to get the interior as i want it . Can anyone recommend somebody to re-upholster the steering wheel, console between the back seats and back of the driver and passenger seat . I was think of having the seats and steering wheel plastic painted or wrapped and there are a couple of german companies on ebay who cover the steering wheels . I can buy all of the parts new although a thousand quid for something that doesn't really need doing and just me being a fussy git . I'm in the process if fitting brand new disks and pads all round ( OEM BMW ) as they are quite rusty. The rears are good condition ( pads nearly new ) other than rust if anyone is interested in the old. The front ones are grooved quite badly . Any help appreciated Thanks and love the car. A 10 year old car shouldn't be this good ?!

12-01-2014, 01:36 PM	#2
digi S5 - Full Throttle Join Date: Apr 2009 Location: Hong Kong Posts: 486 Casino cash: $4438	just buy the carbon bits from Mark on here. They look fab. __________________ E46 M3 CSL + R35 GTR (bolt on mods 600bhp) + 458 Italia + LP560-4 + Audi S5

12-01-2014, 02:14 PM	#4
digi S5 - Full Throttle Join Date: Apr 2009 Location: Hong Kong Posts: 486 Casino cash: $4438	you did mention wrapped. Though you were looking for carbon look or something. If you intent to respray, they are quite easy to do. I resprayed my door handles and smg surround. Was easy and never looked back as they still look fresh and OEM. __________________ E46 M3 CSL + R35 GTR (bolt on mods 600bhp) + 458 Italia + LP560-4 + Audi S5

12-01-2014, 02:35 PM	#6
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	Welcome to the forum I'll be sending my spare steering wheel to these guys: http://royalsteeringwheels.com __________________ Cha'mone Mother F**ker!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-01-2014, 02:03 PM	#3
s3jwl Wonky 'L' after Washing Join Date: Jan 2014 Location: Essex Posts: 7 Casino cash: $290	Bit of a stickler for the standard look i'm afraid although appreciate the advice. Ciao

12-01-2014, 02:19 PM	#5
s3jwl Wonky 'L' after Washing Join Date: Jan 2014 Location: Essex Posts: 7 Casino cash: $290	do you know what colour code i need to use, if i get it resprayed. i think spraying sounds like the best idea to me. Thanks again

12-01-2014, 02:41 PM	#7
s3jwl Wonky 'L' after Washing Join Date: Jan 2014 Location: Essex Posts: 7 Casino cash: $290	your the second person to recommend these people and a BIG thanks. I will get off to them next week and will leave some feedback here. Thanks and appreciate it

12-01-2014, 05:40 PM	#8
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	Shimmy had some interior parts sprayed, I'm sure he will tell you where. No one has managed to do the seat backs

12-01-2014, 05:53 PM	#10
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	Normal paint? How much did they charge?