Rear Console in dry carbon

[alexk]

The other option is to make the rear seats full carbon

BTW, I found a rear seat that is made from carbon and is supposed to be from a pre-production car.
Do you think this is legitimate ?

[Yanto]

Originally Posted by Chris-CSL

slap my name down as well please very intrested

though I have to agree with s.mac the rear platic seat split aginst it could look a little out but lets wait and see

Prob no better / worse than the rear carbon panels/plastic seat.

Brings additional symmetry.

Or as said, thefts get the whole lot done !

[NZ_M3]

Originally Posted by alexk

The other option is to make the rear seats full carbon

BTW, I found a rear seat that is made from carbon and is supposed to be from a pre-production car.
Do you think this is legitimate ?

Hence why I was going to buy a full rear seat from Mr Piers Jones

Pre production car never came with rear seats ... there's a thread I put up with a lot of prototype images that I've collected around the internet on there - go take a look.

here:http://www.cslregister.com/forum/showthread.php?t=4162

[NZ_M3]

Okay ... I've been looking at shipping costs for the rear console and based on an estimated weight of 2kg including packaging and a box dimension of roughly 60cm x 30cm x 20cm (the console has an overall dimension of 55 x 25 x 17, so there's plenty in there for protection).

It works out to be about the following to the UK from good old NZ:

EMS Economy Courier (2 to 6 working days) - tracked and signature - £45
International air package (10 working days) - no tracking and no signature required - £31

I think you guys would also be subject to VAT for goods over a certain value, so best to check. Of course I'd be happy to send these as gifts and marked at a low value so it doesn't attract VAT or duty, but then the risk is yours.

If anyone think they can do better with shipping please let me know.

The above is based on individual shipping rather than combined.

[Yanto]

Originally Posted by ando

I'd be interested in the rocker cover, if you need to gauge numbers on that as well.

Ando

+1

[Yanto]

Originally Posted by NZ_M3

Okay ... I've been looking at shipping costs for the rear console and based on an estimated weight of 2kg including packaging and a box dimension of roughly 60cm x 30cm x 20cm (the console has an overall dimension of 55 x 25 x 17, so there's plenty in there for protection).

It works out to be about the following to the UK from good old NZ:

EMS Economy Courier (2 to 6 working days) - tracked and signature - £45
International air package (10 working days) - no tracking and no signature required - £31

I think you guys would also be subject to VAT for goods over a certain value, so best to check. Of course I'd be happy to send these as gifts and marked at a low value so it doesn't attract VAT or duty, but then the risk is yours.

If anyone think they can do better with shipping please let me know.

The above is based on individual shipping rather than combined.

Cheers Tom

[Csl spurs]

Hi I would be interested in the rocker cover rear tray and the flippers

[NZ_M3]

Hi all

Just a slight update - I've had another chat and discussion with the builder and we have decided to keep the finish of the rear console a bare dry carbon fibre finish instead of a gloss finish - the reason being that with this type of finish it will allow individual owners to either coat it in clear coat 2pack finish or have it painted the same colour as the interior seat matt black coating - or simply leave it as it is for that race car look - no price difference.

Hope you all understand, and if as a result any of you are now no longer interested, please let me know and I'll take you off the EOI list

If you don't quite get what I am talking about - take off one of your front flippers/splitters and look inside and then look at the outside finish - that's the difference basically.

[glendog74]

Hi Tom,

I was hoping it to be clear coated to match all the other bits in the car?

Rob

[CraigMillwardCroft]

Originally Posted by glendog74

Hi Tom,

I was hoping it to be clear coated to match all the other bits in the car?

Rob

+1