ride height?

**shimmy** · 15-02-2009, 03:47 PM

just curious what everybody runs as a right height either OEM suspension or KW/intrax,

i measured mine to top of wheel arch at each corner and all were between 650 and 660 mm

OEM Suspension
NSF = 660mm
OSF = 650mm
NSR = 656mm
OSR = 654mm

Common get those tape measures out

SpineOnABap · 15-02-2009, 04:02 PM

I bet OSF goes to 300mm when you get in

bryce · 15-02-2009, 04:35 PM

KW V3's - measured from ground, through centre of wheel to top of arch.

Front: 630mm
Rear: 620mm

In other words, low

**shimmy** · 15-02-2009, 04:46 PM

Quote:

Originally Posted by SpineOnABap

I bet NSF goes to 300mm when you get in

it might well do but i cant measure it from the drivers seat so will never know!

and do you mean OSF?

SpineOnABap · 15-02-2009, 05:02 PM

Quote:

Originally Posted by shimmy

it might well do but i cant masure it from the drivers seat so will never know!

and do you mean OSF?

Yes, that's what I said ...

hahaha

SMD · 15-02-2009, 05:40 PM

Quote:

Originally Posted by bryce86

KW V3's - measured from ground, through centre of wheel to top of arch.

Front: 630mm
Rear: 620mm

In other words, low

That sounds about right with KW's on i think!

bryce · 15-02-2009, 09:22 PM

Lowest in rear and pretty low in the front.

All tyres are just in line with the arch. Slight tuckage maybe.

SMD · 15-02-2009, 11:50 PM

Alot of cars that are low have trouble at Nurburgring due the bumps etc and hit the floor! Have to watch out bryce!

bryce · 15-02-2009, 11:53 PM

Yeah, but Im sure they're not driving as slow as your mum - like I will be

SMD · 15-02-2009, 11:54 PM

15-02-2009, 03:47 PM	#1
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	ride height? just curious what everybody runs as a right height either OEM suspension or KW/intrax, i measured mine to top of wheel arch at each corner and all were between 650 and 660 mm OEM Suspension NSF = 660mm OSF = 650mm NSR = 656mm OSR = 654mm Common get those tape measures out

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CSL Seat height issue - that bloody adjustor screw	Rags	Technical Area	1	11-10-2008 07:21 PM

15-02-2009, 04:02 PM	#2
SpineOnABap S5, Sport Off, DSC M-track Join Date: May 2008 Location: Earth Posts: 561 Casino cash: $5714	I bet OSF goes to 300mm when you get in

15-02-2009, 04:35 PM	#3
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	KW V3's - measured from ground, through centre of wheel to top of arch. Front: 630mm Rear: 620mm In other words, low

15-02-2009, 09:22 PM	#7
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	Lowest in rear and pretty low in the front. All tyres are just in line with the arch. Slight tuckage maybe.

15-02-2009, 11:50 PM	#8
SMD S6, Sport On, Traction Off Join Date: Jun 2008 Location: Shropshire Posts: 1,505 Casino cash: $10726	Alot of cars that are low have trouble at Nurburgring due the bumps etc and hit the floor! Have to watch out bryce!

15-02-2009, 11:53 PM	#9
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	Yeah, but Im sure they're not driving as slow as your mum - like I will be

15-02-2009, 11:54 PM	#10
SMD S6, Sport On, Traction Off Join Date: Jun 2008 Location: Shropshire Posts: 1,505 Casino cash: $10726