Back box

Bounce · 26-09-2012, 01:50 PM

I was rained off at work today,so instead of doing paperwork and our VAT return,which I should of done,I decided to go down the road and see my mate in his garage to see if he could fit my back box purchased over the weekend from a fellow member on here.so up on the ramp she went.Fitting went well,my clamps were not in to bad condition,the bolts and nuts on the other hand were fooked and it took us a little while to cut the bolts and get them out.While my mate undid the nuts for the hangers I lowered the oem box down,it was a lot heavier than I imagined.We then started to put the rubber hangers on the new box and noticed 2 of them were split,but we used them anyway and I have ordered 3 new ones from our local dealer.So it all went a little easier than I thought and the Agency power (we think) rear box fitted well and looks the dogs bollox with the 80mm titainiam tips.I then started her up to check for any leaks around the clamps.The sound is what I wanted,not to much,but a nice snarley sound,I was also a little worried about the drone in the car,but after taking it up a duel carriage way on the way home,this also doesn't seem to bad,the worst being at about 2500-3000rpm but I can live with that as it wasn't to bad,at 6-7k revs it sounds awesome.So all in all I'm a happy bunny and can't wait for some dry weather to go out and scare some animals and old people.

pics to follow when I can work out how to do it on a iPad.

need4speed · 26-09-2012, 04:49 PM

Good to hear that you're happy with it Brett, remember it will get a bit louder as time goes on

Bounce · 26-09-2012, 04:59 PM

Quote:

Originally Posted by need4speed

Good to hear that your happy with it Brett, remember it will get a bit louder as time goes on

Thanks Grant,you were right about the bolts

s.mac · 26-09-2012, 09:57 PM

Quote:

remember it will get a bit louder as time goes on

its OK , Bret get deafer as time goes on

sfh3l · 26-09-2012, 09:58 PM

Brett,
Did it work out to be much lighter in the end then? The 'new' box was 12 kilos according to my bedroom scales. (but then I'm only 8 stone on them too

just kidding).
Glad you are pleased with it - I wish I'd got around to fitting it to my CSL now.....

sfh3l · 26-09-2012, 09:59 PM

Quote:

Originally Posted by s.mac

its OK , Bret get deafer as time goes on

What was that you said?

Bounce · 26-09-2012, 11:19 PM

Quote:

Originally Posted by sfh3l

Brett,
Did it work out to be much lighter in the end then? The 'new' box was 12 kilos according to my bedroom scales. (but then I'm only 8 stone on them too

just kidding).
Glad you are pleased with it - I wish I'd got around to fitting it to my CSL now.....

ill put the oem one on our scales and see what it is,I bet it's twice the weight of the new one

mattCSLnut · 27-09-2012, 12:02 AM

Quote:

Originally Posted by Bounce

ill put the oem one on our scales and see what it is,I bet it's twice the weight of the new one

I'll save you the bother Bret ... OEM CSL back box is about 25 kg

billyboysm3 · 27-09-2012, 11:48 AM

What back box have you got?

Bounce · 30-10-2012, 10:21 AM

Quote:

Originally Posted by billyboysm3

What back box have you got?

Its either Status Gruppe or Agency Power as they both look exactly the same.

26-09-2012, 01:50 PM	#1
Bounce CSL Register Uber-poster! Join Date: Nov 2009 Location: Cornwall Posts: 7,057 Casino cash: $35793	Back box I was rained off at work today,so instead of doing paperwork and our VAT return,which I should of done,I decided to go down the road and see my mate in his garage to see if he could fit my back box purchased over the weekend from a fellow member on here.so up on the ramp she went.Fitting went well,my clamps were not in to bad condition,the bolts and nuts on the other hand were fooked and it took us a little while to cut the bolts and get them out.While my mate undid the nuts for the hangers I lowered the oem box down,it was a lot heavier than I imagined.We then started to put the rubber hangers on the new box and noticed 2 of them were split,but we used them anyway and I have ordered 3 new ones from our local dealer.So it all went a little easier than I thought and the Agency power (we think) rear box fitted well and looks the dogs bollox with the 80mm titainiam tips.I then started her up to check for any leaks around the clamps.The sound is what I wanted,not to much,but a nice snarley sound,I was also a little worried about the drone in the car,but after taking it up a duel carriage way on the way home,this also doesn't seem to bad,the worst being at about 2500-3000rpm but I can live with that as it wasn't to bad,at 6-7k revs it sounds awesome.So all in all I'm a happy bunny and can't wait for some dry weather to go out and scare some animals and old people. pics to follow when I can work out how to do it on a iPad.

26-09-2012, 04:49 PM	#2
need4speed S5, Sport Off, DSC M-track Join Date: Aug 2010 Location: Dubai Posts: 569 Casino cash: $11168	Good to hear that you're happy with it Brett, remember it will get a bit louder as time goes on Last edited by need4speed; 26-09-2012 at 06:02 PM.

26-09-2012, 09:58 PM	#5
sfh3l S3 - On the open road Join Date: Aug 2010 Posts: 94 Casino cash: $1636	Brett, Did it work out to be much lighter in the end then? The 'new' box was 12 kilos according to my bedroom scales. (but then I'm only 8 stone on them too just kidding). Glad you are pleased with it - I wish I'd got around to fitting it to my CSL now..... __________________ Best Regards, Sam. SG '04 csl (now sadly sold) - Fjord '72 csl - Traumschwartz '90 Z1 - Black '08 Boxster - Blood Orange '72 911 - BRG '34 Austin 7 Special

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

27-09-2012, 11:48 AM	#9
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,001 Casino cash: $25206	What back box have you got?