CSL Engine Rattle - Help - Page 2

nigelonich · 08-06-2012, 02:59 PM

I have been offered a replacement CSL motor so as it was reasonably priced and warranted I have decided to take that option. By the time I buy cams, rockers, gaskets and apply either my time or someone elses its a break-even scenario really at best. Thats if there is no other issue of course.

A friend of mine and I started the motor last night and beween all information we have the motor needs a top end rebuild if its done right.

If anyone is interested in the motor that comes out let me know. It will be a 41k mile head block and sump bare with the issues described by me in this thread. Ill take a video/sound of the engine running or if your quick you can come round and listen!

Whimper

Nigel

nigelonich · 08-06-2012, 05:38 PM

Guys>

For the record this is what you dont want to hear from your CSL! Video with sound last night.

http://www.youtube.com/watch?v=goDPL26X0x8

Sounds just like this guys who has a similar problem on a stock M3 S54>

nigelonich · 26-06-2012, 12:58 PM

Engine removed and new engine ready to go in. Takes a while to do but enjoying it a bit more now ive stopped crying.

Just waiting for new flywheel bolts from BMW.

Anyone got the torque setting as it wasnt clear on TIS.

Cheers

nigelonich · 26-06-2012, 03:31 PM

Some good news. Sold the old engine on Pistonheads in 30 mins.....

azrael · 26-06-2012, 03:34 PM

Quote:

Originally Posted by nigelonich

Some good news. Sold the old engine on Pistonheads in 30 mins.....

That is good going!

nigelonich · 24-07-2012, 05:26 PM

Can anyone tell me the torque settings for the flywheel bolts and for the four bolts that hold the front pulley on? I think its 115nm for the flywhel bolts but no idea what to use for the front pulley.
Cheers

giraffe · 24-07-2012, 06:26 PM

60NM then 50`, 50`For vibration damper ( 4 bolts ) . 120NM flywheel bolts

nigelonich · 26-07-2012, 06:46 PM

Thanks. We fittted the flywheel back on last night and got the pulley on. A satisfying moment when it made it to the bellhousing for a couple of amatuers like us!

nigelonich · 01-08-2012, 03:35 PM

Going great with the rebuild but>

Any idea what goes in this plug which is on the fule rail? We cant seem to find anything to plug into it and wondered if it was spare?

http://i50.photobucket.com/albums/f3...nich/csl01.jpg

Thanks in advance.

**Mark CSL** · 01-08-2012, 07:13 PM

There is a wire and plug come up from below and it plugs in to this
Not sure where it goes with out removing the airbox

24-07-2012, 06:26 PM	#17
giraffe S5 - Full Throttle Join Date: Aug 2011 Location: cambs Posts: 285 Casino cash: $3859	60NM then 50`, 50`For vibration damper ( 4 bolts ) . 120NM flywheel bolts __________________ Keep on rolling

01-08-2012, 07:13 PM	#20
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	There is a wire and plug come up from below and it plugs in to this Not sure where it goes with out removing the airbox __________________ www.procarkits.co.uk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2012, 02:59 PM	#11
nigelonich Mode S1 - Starting Out Join Date: Mar 2011 Location: Scotland Posts: 27 Casino cash: $399	I have been offered a replacement CSL motor so as it was reasonably priced and warranted I have decided to take that option. By the time I buy cams, rockers, gaskets and apply either my time or someone elses its a break-even scenario really at best. Thats if there is no other issue of course. A friend of mine and I started the motor last night and beween all information we have the motor needs a top end rebuild if its done right. If anyone is interested in the motor that comes out let me know. It will be a 41k mile head block and sump bare with the issues described by me in this thread. Ill take a video/sound of the engine running or if your quick you can come round and listen! Whimper Nigel

26-06-2012, 12:58 PM	#13
nigelonich Mode S1 - Starting Out Join Date: Mar 2011 Location: Scotland Posts: 27 Casino cash: $399	Engine removed and new engine ready to go in. Takes a while to do but enjoying it a bit more now ive stopped crying. Just waiting for new flywheel bolts from BMW. Anyone got the torque setting as it wasnt clear on TIS. Cheers

26-06-2012, 03:31 PM	#14
nigelonich Mode S1 - Starting Out Join Date: Mar 2011 Location: Scotland Posts: 27 Casino cash: $399	Some good news. Sold the old engine on Pistonheads in 30 mins.....

24-07-2012, 05:26 PM	#16
nigelonich Mode S1 - Starting Out Join Date: Mar 2011 Location: Scotland Posts: 27 Casino cash: $399	Can anyone tell me the torque settings for the flywheel bolts and for the four bolts that hold the front pulley on? I think its 115nm for the flywhel bolts but no idea what to use for the front pulley. Cheers

26-07-2012, 06:46 PM	#18
nigelonich Mode S1 - Starting Out Join Date: Mar 2011 Location: Scotland Posts: 27 Casino cash: $399	Thanks. We fittted the flywheel back on last night and got the pulley on. A satisfying moment when it made it to the bellhousing for a couple of amatuers like us!

01-08-2012, 03:35 PM	#19
nigelonich Mode S1 - Starting Out Join Date: Mar 2011 Location: Scotland Posts: 27 Casino cash: $399	Going great with the rebuild but> Any idea what goes in this plug which is on the fule rail? We cant seem to find anything to plug into it and wondered if it was spare? http://i50.photobucket.com/albums/f3...nich/csl01.jpg Thanks in advance.