Go Pro mounting in CSL ?

[ando]

I use the wrist band mount thingy and cable tied it to the front grill under the number plate, gives a great low angle on track, shows speed and looks good.

HTH

Ando

[acidace]

First I mounted the gopro on the Cage with a roll bar mount just behind the seat, but every little movement from the chassis/cage while driving could be heared on video as a loud squeak.

Now I have a other sound problem: the gopro is mounted on in the middle on front window and there is a whistling noise when accelerating. I can hear it only on Video, for example when I start a lap on the nürburgring or accelerating after Adenauer Forst. IMHO it is a electrical field from the engine. And it was NOT audible when I had the cam at the cage!

Does anyone have the same problem? Or a solution?

[monkeycsl]

Helmet helmet helmettttt

[83SY]

I like the sound of this mounting point Ando. Have you got any clips you can load up onto the thread ?

Originally Posted by ando

I use the wrist band mount thingy and cable tied it to the front grill under the number plate, gives a great low angle on track, shows speed and looks good.

HTH

Ando

[Porter]

Originally Posted by 83SY

I like the sound of this mounting point Ando. Have you got any clips you can load up onto the thread ?

It would be great to see how you install the set up on the car, too, of that's ok.

Thanks.

[breeze]

Resurrecting this thread now that I have got myself a shiny new GoPro Hero3 silver.

Was there a preferred answer to this for in-car mounting?

Options I see are:
- Rear view mirror (with a sticky pad?)
- Passenger sun visor
- Suction mount, which may or may not be acceptable on TDs.

Hmm...

[adem.csl]

image.jpgI used the sticky 3m pad flat mount and stuck it behind the mirror on passenger side so its out the way.most tracks don't allow suction cup mounts and i saw one person get his converscates cos he kept trying to use it on track you can see in this pic where mine is

[DuncanR]

Ref mounting point on bumper see attached.
This video has NOT been speeded up !

http://www.youtube.com/watch?v=rUa_teR4UKE

[karbonkid]

Originally Posted by DuncanR

Ref mounting point on bumper see attached.
This video has NOT been speeded up !

Pix to help illustrate Dunc's possible mount point. I tried 4-5years ago and worked great.

[breeze]

Originally Posted by adem.csl

Attachment 8905I used the sticky 3m pad flat mount and stuck it behind the mirror on passenger side so its out the way.most tracks don't allow suction cup mounts and i saw one person get his converscates cos he kept trying to use it on track you can see in this pic where mine is

That was the route I went in the end - perfect mounting, stable and not visible when in the car.

I do quite fancy an external suction mount at some point (doors, roof) but I am aware that they can be difficult with some TD organizers.

Thanks all.