CSL smarten up plans - Page 2

s.mac · 10-12-2011, 06:42 PM

yep, mine will be defo be getting freshened up

Interested in how you did the seats Adam? I know a shit hot painter if you need one for the bumper.

I found out my local dealer fooked a nipple on my APs when changing the fluid so I will need to sort that out. Ordered a new set of AST rear springs so they will be going on at some point.

Shimmy, wire wool and a wire brush will sort the tubes and rattle clips, put a bit of hammerite on the clips, the tubes are alloy and clean up nicely.

s.mac · 10-12-2011, 06:49 PM

I think God speed re furb APs now (inc painting), not sure how much £££

**shimmy** · 10-12-2011, 06:51 PM

I've got a better idea, let's all take them round Alex's for the winter

**AlexGTT** · 10-12-2011, 08:28 PM

Quote:

Originally Posted by shimmy

I've got a better idea, let's all take them round Alex's for the winter

I could have predicted that.

Get your grity sponge and jet wash out then.

Detailing, Shimmy style.

rstoughy · 10-12-2011, 10:14 PM

Well i'm going for complete front end respray from windscreen forward, lower 1/2 on both sides to fix the shot blast look & rear bumper.
Also have a dog inflicted dent to get taken out of the drivers door.

Air box has a snapped screw which i need to extract and I also have the rear seat issues.

Reading that back it seems i have trashed the car this year

azrael · 11-12-2011, 01:47 PM

Quote:

Originally Posted by rstoughy

Well i'm going for complete front end respray from windscreen forward, lower 1/2 on both sides to fix the shot blast look & rear bumper.
Also have a dog inflicted dent to get taken out of the drivers door.

Air box has a snapped screw which i need to extract and I also have the rear seat issues.

Reading that back it seems i have trashed the car this year

Nope you've just used it that's all. Cars are getting on a bit now so bound to show signs of use. Better than garage queen you're too scared to use though

Bounce · 11-12-2011, 03:13 PM

Luckily i dont need to do much this winter,ive got one small dent above the fuel filler and could do with new front discs and pads.I think ill get the front end and infront the rear arches done next year as their not to bad

Yanto · 11-12-2011, 08:48 PM

I'm getting a Sandra installed on the bonnet

Bounce · 11-12-2011, 08:57 PM

Quote:

Originally Posted by Yanto

I'm getting a Sandra installed on the bonnet

Get two and you could use the chins as front splitters

phoenixcsl · 12-12-2011, 11:45 AM

Cor I've got loads to do to keep mine nice and tidy over the winter, plus I need to clear the garage from all the bits i'm accumulating!

Fit my Nitron Coilovers, 12mm Spacers, RTAB's, Poly ARB Bushes, Performance Friction Pads, Pollen & Air Filters...oh need a Steering Wheel Re-Trim and a Wheel Refurb in OEM finish whilst she's in bits...

Roll on the Spring

10-12-2011, 06:51 PM	#13
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	I've got a better idea, let's all take them round Alex's for the winter __________________ .

10-12-2011, 10:14 PM	#15
rstoughy S6, Sport On, Traction Off Join Date: Jun 2008 Location: Aberdeenshire Posts: 1,947 Casino cash: $25387	Well i'm going for complete front end respray from windscreen forward, lower 1/2 on both sides to fix the shot blast look & rear bumper. Also have a dog inflicted dent to get taken out of the drivers door. Air box has a snapped screw which i need to extract and I also have the rear seat issues. Reading that back it seems i have trashed the car this year __________________ Paul. Ooooft!!! 15yrs in the CSL and still loving it "shine on you crazy diamond"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-12-2011, 06:42 PM	#11
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	yep, mine will be defo be getting freshened up Interested in how you did the seats Adam? I know a shit hot painter if you need one for the bumper. I found out my local dealer fooked a nipple on my APs when changing the fluid so I will need to sort that out. Ordered a new set of AST rear springs so they will be going on at some point. Shimmy, wire wool and a wire brush will sort the tubes and rattle clips, put a bit of hammerite on the clips, the tubes are alloy and clean up nicely.

10-12-2011, 06:49 PM	#12
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	I think God speed re furb APs now (inc painting), not sure how much £££

11-12-2011, 03:13 PM	#17
Bounce CSL Register Uber-poster! Join Date: Nov 2009 Location: Cornwall Posts: 7,057 Casino cash: $35793	Luckily i dont need to do much this winter,ive got one small dent above the fuel filler and could do with new front discs and pads.I think ill get the front end and infront the rear arches done next year as their not to bad

11-12-2011, 08:48 PM	#18
Yanto CSL Register Uber-poster! Moon Lander Champion! Ragdoll Master Champion! Join Date: Mar 2009 Location: Docklands, London Posts: 5,931 Casino cash: $40036	I'm getting a Sandra installed on the bonnet

12-12-2011, 11:45 AM	#20
phoenixcsl S5, Sport Off, DSC M-track Join Date: Aug 2009 Location: Surrey Posts: 634 Casino cash: $4900	Cor I've got loads to do to keep mine nice and tidy over the winter, plus I need to clear the garage from all the bits i'm accumulating! Fit my Nitron Coilovers, 12mm Spacers, RTAB's, Poly ARB Bushes, Performance Friction Pads, Pollen & Air Filters...oh need a Steering Wheel Re-Trim and a Wheel Refurb in OEM finish whilst she's in bits... Roll on the Spring