18 x 9.5J track wheels?

**glendog74** · 25-07-2010, 01:35 PM

I know a few of you run 18 x 9J for track wheels...

Has anyone had experience of 18 x 9.5J all round?

Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front)

shane@mbtech · 25-07-2010, 02:30 PM

Quote:

Originally Posted by glendog74

I know a few of you run 18 x 9J for track wheels...

Has anyone had experience of 18 x 9.5J all round?

Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front)

Depends on offset Rob, I reckon with a 27 offset they would be fine.

I run 265 35 18 on 9j rims with success, so 9.5 no advantage really for me.

**glendog74** · 25-07-2010, 06:09 PM

Quote:

Originally Posted by lawsy

Depends on offset Rob, I reckon with a 27 offset they would be fine.

Why ET27? Is that the optimum offset to avoid contact interference?

How about 18 x 10.5J ET28 on rears only with 18 x 9.5J ET41 on fronts?

Out of interest, what are the ETs on the standard CSL 19" Cup wheels?

**alexk** · 25-07-2010, 07:13 PM

Quote:

Originally Posted by glendog74

Out of interest, what are the ETs on the standard CSL 19" Cup wheels?

ET44 front
ET27 rear

Thank you please

**glendog74** · 25-07-2010, 07:18 PM

Quote:

Originally Posted by alexk

ET44 front
ET27 rear

Thank you please

Cheers Alex

shane@mbtech · 25-07-2010, 07:50 PM

With that offset you may be tucked in the arch a little, they might be perfect, just try them. Suck it and see.

It will look so schweet Rob

You have PM by the way.

chris mc · 25-07-2010, 06:26 PM

will this not cause the car to tramline or "track" quite badly?

**shimmy** · 02-09-2010, 09:39 PM

Quote:

Originally Posted by glendog74

I know a few of you run 18 x 9J for track wheels...

Has anyone had experience of 18 x 9.5J all round?

Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front)

Rob, missed this when on holiday but i run 18x9.5J all round (Volks) with 265x35 Cups both -3 and -2 camber with no rubbing whatsoever

front are et37 with 3mm spacers therefore effectively et34. this runs it very close to the spring/damper assembly but along way from the wheel arch hence why i can run -2 camber without touching wheel arch or liner. i had to use shortended follower springs on the front intrax or slightly bigger spacers might have been necessary

rears are et15 with no spacers and differnent wheel design to keep the look of a deeper dish as the staggered look so i get it both ways

only downside to my set up is rims are not interchangeable front to back BUT tyres are which is fine as plenty of time between trackdays to swap the tyres over

i would recommend borrowing a pair of the rims from someone who has them and trial fit to make sure they work on your car

25-07-2010, 01:35 PM	#1
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	18 x 9.5J track wheels? I know a few of you run 18 x 9J for track wheels... Has anyone had experience of 18 x 9.5J all round? Any potential clearance issues using 265/35/ZR18 Cups? (I run -2.5 degrees camber at front) __________________ Cha'mone Mother F**ker!

25-07-2010, 07:50 PM	#6
shane@mbtech CSL Register Uber-poster! Join Date: Feb 2009 Location: warrington Posts: 5,419 Casino cash: $19783	With that offset you may be tucked in the arch a little, they might be perfect, just try them. Suck it and see. It will look so schweet Rob You have PM by the way.

25-07-2010, 06:26 PM	#7
chris mc Wonky 'L' after Washing Join Date: Mar 2010 Posts: 18 Casino cash: $10	will this not cause the car to tramline or "track" quite badly?