CSL Steering Rack

[Craig]

I have a CSL steering rack available, it'll require two new tie rod ends / rack arms and one rubber boot to make it whole again. But the mechanical function of the rack is just fine.

I'll post some pictures later, but like I said this rack is not complete, I can supply some arms (they were pulled out of the socket) however I'd replace them for good measure.

PM, e-mail; craig@cmpracing.co.uk or phone/text 07737 3844557.

[shane@mbtech]

Originally Posted by Craig

I have a CSL steering rack available, it'll require two new tie rod ends / rack arms and one rubber boot to make it whole again. But the mechanical function of the rack is just fine.

I'll post some pictures later, but like I said this rack is not complete, I can supply some arms (they were pulled out of the socket) however I'd replace them for good measure.

PM, e-mail; craig@cmpracing.co.uk or phone/text 07737 3844557.

Out of interest craig how do you know its mechanically fine if you have not fitted the tie rods and connnected it up to a pressurised pas system to rule out leaks?

Wouldnt want someone to fit it and end up with a csl like yours when the steering locks up.

[Craig]

Had a local hydraulic place take a look, they claimed to pressure it up to check for leaks and everything was fine. Obviously I have not bolted it up to a car and run it, although if it fits my e36 I might just do that, and keep it on there!!

Depending on the interest, I'm tempted to send it to powersteering.co.uk and get them to re-build it and then sell it at a higher premium complete. This all depends on interest, I am making any potential buyer aware of everything. As most know, I refused to even sell this rack until someone else had looked at it!

[mattCSLnut]

Originally Posted by Craig

Had a local hydraulic place take a look, they claimed to pressure it up to check for leaks and everything was fine. Obviously I have not bolted it up to a car and run it, although if it fits my e36 I might just do that, and keep it on there!!

Depending on the interest, I'm tempted to send it to powersteering.co.uk and get them to re-build it and then sell it at a higher premium complete. This all depends on interest, I am making any potential buyer aware of everything. As most know, I refused to even sell this rack until someone else had looked at it!

That's a very honorable attitude Craig Top marks. BTW the Business CD player out of your CSL lives on happily in my CSL THANX again.

[weedavey]

Originally Posted by mattCSLnut

That's a very honorable attitude Craig

I agree, well done bud.

[Craig]

Lawsy, I know you wernt... out of interest anyone know what a fully refurbushed rack is worth?

[shimmy]

Originally Posted by mattCSLnut

........ BTW the Business CD player out of your CSL lives on happily in my CSL THANX again.

yes but it is totally pissed off with constantly playing Kylie and show tunes

[shane@mbtech]

Originally Posted by Craig

Had a local hydraulic place take a look, they claimed to pressure it up to check for leaks and everything was fine. Obviously I have not bolted it up to a car and run it, although if it fits my e36 I might just do that, and keep it on there!!

Depending on the interest, I'm tempted to send it to powersteering.co.uk and get them to re-build it and then sell it at a higher premium complete. This all depends on interest, I am making any potential buyer aware of everything. As most know, I refused to even sell this rack until someone else had looked at it!

I wasnt being funny with my post craig, I was just trying to clarify,

If you fully refurbed it with boots, tie rods and track rod ends I think you would get better return,