![]() |
|
![]() |
#1 |
Wonky 'L' after Washing
Join Date: Jul 2017
Posts: 3
Casino cash: $366 ![]() |
![]()
Hi guys,
Did the H&R spacers to my E46 M3 long time ago and now with CSL coming home, are spacers advisable for the car? Solely just to make the car looks nicer. i remember it made so much different to the M3 just by adding in the spacers the cars look so mean. Thanks ! |
![]() |
![]() |
![]() |
#2 |
S5 - Full Throttle
Join Date: Oct 2014
Location: Germany
Posts: 475
Casino cash: $6813 ![]() |
![]()
For driving dynamics? No
For looks? Yes
__________________
Greetings, Julian. ![]() |
![]() |
![]() |
![]() |
#3 |
CSL Register Uber-poster!
![]() ![]() |
![]()
They say adding spacers only to the front helps reduce the slight slow speed understeer the car has.
I have ran 15mm front and 12mm rear for a while now - it certainly helps with aesthetics.
__________________
Cha'mone Mother F**ker! |
![]() |
![]() |
![]() |
#4 |
S6, Sport On, Traction Off
![]() ![]() Join Date: Dec 2010
Location: Norwich
Posts: 1,586
Casino cash: $17592 ![]() |
![]()
I have same as above, and it improves slow speed understeer with no down sides, as well as looks a lot better.
__________________
Mike R Sarcasm is just a free service I provide. Nordschleife, there's only two barriers to worry about - the ones on the left and the ones on the right ![]() CSL number 044 |
![]() |
![]() |
![]() |
#5 |
S5 - Full Throttle
Join Date: Oct 2014
Location: Germany
Posts: 475
Casino cash: $6813 ![]() |
![]()
How much bigger does the spacer in the front need to be to help with the understeer?
I think a square setup would be the better choice if you just want to achieve exactly that.
__________________
Greetings, Julian. ![]() |
![]() |
![]() |
![]() |
#6 |
S6, Sport On, Traction Off
![]() ![]() Join Date: Dec 2010
Location: Norwich
Posts: 1,586
Casino cash: $17592 ![]() |
![]()
I wanted to retain the OEM wheels, so went with 15mm front and 12mm rear spacers.
__________________
Mike R Sarcasm is just a free service I provide. Nordschleife, there's only two barriers to worry about - the ones on the left and the ones on the right ![]() CSL number 044 |
![]() |
![]() |
![]() |
#7 |
Wonky 'L' after Washing
Join Date: Jul 2017
Posts: 3
Casino cash: $366 ![]() |
![]()
Thanks so much guys!!!
Any brand of the spacers you guys would recommend? I guess they are the same as those used on normal E46 M3 Thanks again guys |
![]() |
![]() |
![]() |
#8 |
S5 - Full Throttle
Join Date: Oct 2014
Location: Germany
Posts: 475
Casino cash: $6813 ![]() |
![]()
H&R is good. Cant go wrong with them.
![]() Yes, hubs etc. are the same as normal m3.
__________________
Greetings, Julian. ![]() |
![]() |
![]() |
![]() |
#9 |
Wonky 'L' after Washing
Join Date: Jul 2017
Posts: 3
Casino cash: $366 ![]() |
![]() |
![]() |
![]() |
![]() |
#10 |
S5, Sport Off, DSC M-track
![]() Join Date: Aug 2009
Location: Surrey
Posts: 634
Casino cash: $4900 ![]() |
![]()
I run 15mm front and 10mm rears, have done for years with no issues, in fact I had the same if not a similar setup on my old E46 M3's too.
H&R spacers are very good, so are the BIMECC ones. Make sure you get hubcentric! |
![]() |
![]() |
![]() |
|
|