M3 V8 Carbon CCC Trim in the making

[Mark CSL]

This was a part i am making for a m8 with a M3 V8
Sand the part then cut the carbon
then resin the part and lat the carbon on the parts and into the vacume bag for 8 hours

[Mark CSL]

Day 2 sanded down and more resin applied

[Mark CSL]

part 3
sand some more to get a nice flat surface then more resin

[Mark CSL]

Part 4
More sanding
Then 3 coats of clear applied to give it that deep wet look
I will post some pix tomorrow of the part put back together

[DazBlackCSL]

Marky those bits and all your carbon stuff looks mint ..

Need to get moving on some rear C63 AMG Diffusers !!

[AlexGTT]

Very nice work Mark.

However, you should know better than to use deep and wet to describe anything on here!