AP BBK problem

[chris83d]

Hi guys just wondering if any of you AP owners have experienced a rattling sound from the rear brakes which goes away when applying the brakes? This is driving me nuts. Have just replaced rear hub bushes thinking that was the culprit as there was a bit of play but the problem is still there. I have standard discs on the rear with ap calipers and ferrodo ds2500 pads. Could the pads be rattling inside the calipers? Any advice appreciated!

[s.mac]

Pad rattle 99.9%
Mine does it all the time. It used to do my head in. I never found a solution

[shimmy]

The anti rattle clip will be missing or in the wrong way round.

Search for photos on here.

[trackm3]

Get some solid mounts and you wont notice it again

[knoxville]

I had an annoying clicking sound that could be heard at low speeds and went away when on the brakes. Swapped the DS2500 for RS29 and that problem has gone only to be replaced by squeel

[shimmy]

Originally Posted by shimmy

The anti rattle clip will be missing or in the wrong way round.

Search for photos on here.

[chris83d]

Originally Posted by shimmy

Shimmy don't suppose you have more info on this? I can't seem to find any pics. Cheers.

[sailorbaz]

I had something similar and it turned out the anti-rattle clip was rubbing on the back of the pad. Hard to explain but couple of minutes with a die grinder, bit of black paint and it was good as new. Was making a hellish squeaking noise you could hear when travelling at slow speeds.

There's an orientation arrow on the retaining clips, it should be pointing up, in the direction of rotation and the convex part should be pressing against the pad, thus holding it in tight to the caliper and stopping the pad rattling... sounds good, but I could be wrong.

My problem was, the hole in the middle of the clip was a fraction too tight for the wee removal tap on the pads, and in turn was making it squeak.