EML caused by high flow CATs

**Mike R** · 29-01-2014, 02:09 PM

When-ever I drive like a girl, my EML light comes on due to the higher flow nature of the Supersprint CATs. Sometimes it turns itself off, or invariably I have to have Gareth switch it off.

However, while it is on, it always in the back of my mind that I could be driving it thinking everything is okay and it is just the CATs when it is actually another issue.

I have three options:
1. Buy the BMW software and keep turning it off.
2. Take it to someone like Evolve and have the sensitivity of the particular sensor turned down so that it doesn't trip out.
3. Fit one of these in between the exhaust and the sensor (which is supposed to reduce the flow to it, this prevent it from tripping out):
http://www.ebay.co.uk/itm/Adjustable...item3a83b08246

Anyone had any experiences of the above and what do most peeps think is best?

shane@mbtech · 29-01-2014, 03:15 PM

Does your car have warranty?

If not get it deleted from the system.

If it has warranty just buy a BMW laptop, guy on cutters sells them.
Check fault code when light comes on.

**Mike R** · 29-01-2014, 03:43 PM

Quote:

Originally Posted by lawsy

Does your car have warranty?

If not get it deleted from the system.

If it has warranty just buy a BMW laptop, guy on cutters sells them.
Check fault code when light comes on.

Yes it has full warranty.

Do you have the link for the laptop software? Will I get a discount if I mention you or do they class you in the same light as Shimmy

?

**Mike R** · 30-01-2014, 02:41 PM

Anyone else?

mattCSLnut · 30-01-2014, 02:58 PM

Quote:

Originally Posted by Mike R

Anyone else?

I've been advised option 2 & 3 however due to the infrequency of the EML light coming On and shear laziness on my part

I keep using option 1 via my Snap On diagnostic tool

**Mike R** · 30-01-2014, 03:01 PM

Quote:

Originally Posted by mattCSLnut

I've been advised option 2 & 3 however due to the infrequency of the EML light coming On and shear laziness on my part

I keep using option 1 via my Snap On diagnostic tool

Who advised you

?

cslsuperfan · 30-01-2014, 07:51 PM

Quote:

Originally Posted by Mike R

When-ever I drive like a girl, my EML light comes on due to the higher flow nature of the Supersprint CATs. Sometimes it turns itself off, or invariably I have to have Gareth switch it off.

However, while it is on, it always in the back of my mind that I could be driving it thinking everything is okay and it is just the CATs when it is actually another issue.

I have three options:
1. Buy the BMW software and keep turning it off.
2. Take it to someone like Evolve and have the sensitivity of the particular sensor turned down so that it doesn't trip out.
3. Fit one of these in between the exhaust and the sensor (which is supposed to reduce the flow to it, this prevent it from tripping out):
http://www.ebay.co.uk/itm/Adjustable...item3a83b08246

Anyone had any experiences of the above and what do most peeps think is best?

Mike

I run the 100 SS cats
the EML light seems to come on whether I've driven hard or out with the Mrs.
Overnight seems to do the trick, EML is usually off next time out.

**Mike R** · 31-01-2014, 09:28 AM

Quote:

Originally Posted by cslsuperfan

Mike

I run the 100 SS cats
the EML light seems to come on whether I've driven hard or out with the Mrs.
Overnight seems to do the trick, EML is usually off next time out.

This seems to have part of the paragraph missing?

Do you mean you disconnect the battery overnight?

SamT · 31-01-2014, 11:49 AM

Mike, I've had no end of problems with the EML light on my CS since putting the race system on it, although this is with a single Race CAT, as it goes to a single Pipe at the headers. I've ended up putting the spacers on the sensors in the CAT, and replaced or cleaned the others (the one in the header had a massive lump of carbon on it!!)..........seems to have fixed it....For Now

From what i gather with the AlphaN Map you can just do a sensor delete, as this seems to be a problem for quite a few people, if mine keeps playing up i'm gonna look into getting it done.

Good Luck Mate
Sam

PS If you want individual sensors you can get Bosch ones from Eurocarparts......BMW will only sell you a full set for about a grand i think...well i may be exaggerating a tad

**Mike R** · 31-01-2014, 12:34 PM

I've just got one for my mate's Clio, so if this cures his I will get one for mine as well. Should be here on Monday

.

29-01-2014, 02:09 PM	#1
Mike R S6, Sport On, Traction Off Join Date: Dec 2010 Location: Norwich Posts: 1,585 Casino cash: $17591	EML caused by high flow CATs When-ever I drive like a girl, my EML light comes on due to the higher flow nature of the Supersprint CATs. Sometimes it turns itself off, or invariably I have to have Gareth switch it off. However, while it is on, it always in the back of my mind that I could be driving it thinking everything is okay and it is just the CATs when it is actually another issue. I have three options: 1. Buy the BMW software and keep turning it off. 2. Take it to someone like Evolve and have the sensitivity of the particular sensor turned down so that it doesn't trip out. 3. Fit one of these in between the exhaust and the sensor (which is supposed to reduce the flow to it, this prevent it from tripping out): http://www.ebay.co.uk/itm/Adjustable...item3a83b08246 Anyone had any experiences of the above and what do most peeps think is best? __________________ Mike R Sarcasm is just a free service I provide. Nordschleife, there's only two barriers to worry about - the ones on the left and the ones on the right . CSL number 044

30-01-2014, 02:41 PM	#4
Mike R S6, Sport On, Traction Off Join Date: Dec 2010 Location: Norwich Posts: 1,585 Casino cash: $17591	Anyone else? __________________ Mike R Sarcasm is just a free service I provide. Nordschleife, there's only two barriers to worry about - the ones on the left and the ones on the right . CSL number 044

31-01-2014, 11:49 AM	#9
SamT S2 - Picking it up Join Date: Dec 2012 Location: Rye Posts: 64 Casino cash: $654	Mike, I've had no end of problems with the EML light on my CS since putting the race system on it, although this is with a single Race CAT, as it goes to a single Pipe at the headers. I've ended up putting the spacers on the sensors in the CAT, and replaced or cleaned the others (the one in the header had a massive lump of carbon on it!!)..........seems to have fixed it....For Now From what i gather with the AlphaN Map you can just do a sensor delete, as this seems to be a problem for quite a few people, if mine keeps playing up i'm gonna look into getting it done. Good Luck Mate Sam PS If you want individual sensors you can get Bosch ones from Eurocarparts......BMW will only sell you a full set for about a grand i think...well i may be exaggerating a tad __________________ [IMG][/IMG] Last edited by SamT; 31-01-2014 at 12:28 PM. Reason: added PS

31-01-2014, 12:34 PM	#10
Mike R S6, Sport On, Traction Off Join Date: Dec 2010 Location: Norwich Posts: 1,585 Casino cash: $17591	I've just got one for my mate's Clio, so if this cures his I will get one for mine as well. Should be here on Monday . __________________ Mike R Sarcasm is just a free service I provide. Nordschleife, there's only two barriers to worry about - the ones on the left and the ones on the right . CSL number 044

29-01-2014, 03:15 PM	#2
shane@mbtech CSL Register Uber-poster! Join Date: Feb 2009 Location: warrington Posts: 5,419 Casino cash: $19783	Does your car have warranty? If not get it deleted from the system. If it has warranty just buy a BMW laptop, guy on cutters sells them. Check fault code when light comes on.