Front Propshaft Coupling?

[shimmy]

What does it look like, where does it go, and how much to change.

What else should I do when down there

Thank you.

[O'Neill]

Originally Posted by shimmy

What does it look like, where does it go, and how much to change.

What else should I do when down there

Thank you.

See Gareth or Ant, easy

[Neil M]

Originally Posted by shimmy

What does it look like, where does it go, and how much to change.

What else should I do when down there

Thank you.

Like this: $(KGrHqMOKowFJLbPgp8MBSWZTZ2YvQ~~60_12.JPG

The part should be about £45 but the labour might be a tad more expensive

[Neil M]

Where it fits in the scheme of things:

[adem.csl]

You also need a strip of butyle tape because you need to lower the centre bearing to get the doughnut off.if you don't you may get vibration like i did had to buy the tape to mount centre bearing all was good after.i can fit it if you want it done local

[J2LTB]

Shimmy I replaced my prop coupling and centre bearing myself. I used a Lemforder part from euro car parts. The car drives loads better from stand still. Must have been flexing. BMW quoted me £600 to replace just the coupler. I did that and the centre bearing for just over £100 .

[shimmy]

Originally Posted by J2LTB

Shimmy I replaced my prop coupling and centre bearing myself. I used a Lemforder part from euro car parts. The car drives loads better from stand still. Must have been flexing. BMW quoted me £600 to replace just the coupler. I did that and the centre bearing for just over £100 .