Assistance on MAP sensor

m3dragon · 29-08-2013, 04:49 PM

I did a search and I am probably tying the wring criteria.

Can anyone please assist me in figuring out the MAP sensor.

1. Could you post a image of it
2. Where does the wire harness for the MAP sensor connect?
3. Do you know or can you help me figure out the needed part number?

Thank you in advance

**cantfind1** · 30-08-2013, 04:44 AM

http://alexroyphotography.com/e46m3b...l/IMG_1175.jpg

it sit on top op the air rail at the rear of the engine.

Wires into one of two engine looms which plug into the ecu....

m3dragon · 30-08-2013, 05:57 AM

Thanks cantfind1

I have the map sensor and map rail. I would like some images of the part installed and any information of how it is wired to the DME.

Anyone have that information by chance?

m3dragon · 03-09-2013, 06:21 PM

Anyone???

I am tying to find the part number now for the connector that plugs into the sensor and how it is wired to the DME. I can't find it on realoem

Anyone???

NZ_M3 · 04-09-2013, 12:19 AM

If you do a search I posted a photo for another member of the connector plug part number quite a while back.

Also the wiring diagram is under SSP-SP0000022670 - Intake air temperature/intake pressure sensor.

m3dragon · 04-09-2013, 02:21 AM

Quote:

Originally Posted by NZ_M3

If you do a search I posted a photo for another member of the connector plug part number quite a while back.

Also the wiring diagram is under SSP-SP0000022670 - Intake air temperature/intake pressure sensor.

Thank you NZ. I did a search and must be using the wrong criteria. I will search you posts.

Thank you for the wire info.

terraphantm · 04-09-2013, 07:24 PM

Hey guys, I'm an active member at M3Forum, with a particular interest in the DME side of things. Would any of you guys have a picture of the actual connector with the pins visible? BMW doesn't appear to sell it separately, and I'm hoping it can be sourced from TE connectivity

Also m3dragon here's a clearer picture of the diagram. Just 3 wires, so it shouldn't be terribly difficult to add, especially since the DME box is right there

_Nathan_ · 04-09-2013, 07:57 PM

I've got a DME & loom sat in a box but not sure if I can get to it anytime soon, will see if I can sort a picture

29-08-2013, 04:49 PM	#1
m3dragon S3 - On the open road Join Date: May 2012 Location: California Posts: 96 Casino cash: $748	Assistance on MAP sensor I did a search and I am probably tying the wring criteria. Can anyone please assist me in figuring out the MAP sensor. 1. Could you post a image of it 2. Where does the wire harness for the MAP sensor connect? 3. Do you know or can you help me figure out the needed part number? Thank you in advance __________________ NorCal drive organizer guy Drive database and photo locations

30-08-2013, 05:57 AM	#3
m3dragon S3 - On the open road Join Date: May 2012 Location: California Posts: 96 Casino cash: $748	Thanks cantfind1 I have the map sensor and map rail. I would like some images of the part installed and any information of how it is wired to the DME. Anyone have that information by chance? __________________ NorCal drive organizer guy Drive database and photo locations

03-09-2013, 06:21 PM	#4
m3dragon S3 - On the open road Join Date: May 2012 Location: California Posts: 96 Casino cash: $748	Anyone??? I am tying to find the part number now for the connector that plugs into the sensor and how it is wired to the DME. I can't find it on realoem Anyone??? __________________ NorCal drive organizer guy Drive database and photo locations

04-09-2013, 12:19 AM	#5
NZ_M3 S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Auckland, New Zealand Posts: 1,434 Casino cash: $13579	If you do a search I posted a photo for another member of the connector plug part number quite a while back. Also the wiring diagram is under SSP-SP0000022670 - Intake air temperature/intake pressure sensor. Last edited by NZ_M3; 04-09-2013 at 01:44 AM.

04-09-2013, 07:24 PM	#7
terraphantm S2 - Picking it up Join Date: Sep 2013 Posts: 40 Casino cash: $400	Hey guys, I'm an active member at M3Forum, with a particular interest in the DME side of things. Would any of you guys have a picture of the actual connector with the pins visible? BMW doesn't appear to sell it separately, and I'm hoping it can be sourced from TE connectivity Also m3dragon here's a clearer picture of the diagram. Just 3 wires, so it shouldn't be terribly difficult to add, especially since the DME box is right there Last edited by terraphantm; 04-09-2013 at 07:35 PM.

30-08-2013, 04:44 AM	#2
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	http://alexroyphotography.com/e46m3b...l/IMG_1175.jpg it sit on top op the air rail at the rear of the engine. Wires into one of two engine looms which plug into the ecu....

04-09-2013, 07:57 PM	#8
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	I've got a DME & loom sat in a box but not sure if I can get to it anytime soon, will see if I can sort a picture __________________ Nathan